how bad is everyones "lean"
#1
how bad is everyones "lean"
so i cranked my bars 2inchs today to lvl her out but now i can really see the lean in the truck its 35" in the rear on one side and 36" on the other is this a normal ranger lean i have no got an alignment yet im scheduled for one 2day is it going to help even it out a little bit more im just wondering if the 1" difference is the so called "ranger Lean"
Last edited by aford89; 04-20-2009 at 01:17 PM. Reason: re read it
#5
#7
I thought the Ranger lean was when it's lower on the driver's side, not higher... Is it an inch higher on the driver's side with you sitting in it, or is that with the vehicle unoccupied? If it's an inch higher with the vehicle unoccupied, try sitting in the driver's seat and have somebody else measure/tell you if it's level (or have the other person sit in the driver's seat and you measure if you don't trust the other person with a tape measure ).
#9
That would be like putting 3" BL spacers down one side and leaving it stock down the other....
If I could read half of what you just posted, I would either laugh because it's funny.... or cry because it's so stupid.
and yes.... I'm cereal.
#10
#14
#18
#19
My lean is 3/4". Driver's side HIGHER than passenger side. There was a garage fire right across the alley from where I park. Most of the heat was carried right by the passenger side. I am assuming that is my problem. Perhaps the shock was overheated and leaked. I can't remember if the truck leaned before the fire. Even with a full tank and when I am sitting in it, it leans by 1/4". Do bad shocks add to the lean?
Thread
Thread Starter
Forum
Replies
Last Post
TheBearJeweler
General Ford Ranger Discussion
13
09-17-2008 03:04 PM