Suspension Tech General discussion of suspension for the Ford Ranger.

Suspension lift help...

Thread Tools
 
Search this Thread
 
  #1  
Old 06-18-2010
Little Bear's Avatar
Member
Thread Starter
Join Date: May 2010
Location: Charleston, SC
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
Suspension lift help...

I know suspension lifts are sold engine and drivetrain specific, and I have a 2.5L 2wd Ranger. Now, since I can't find one for my engine theoretically could I order a 3.0 lift and put it on? Would the front shocks just be really stiff because its not for my truck. I've found quite a few 2wd lifts. Like from Fabtech and what not...
Would this work or is this just the most retarded question ever?
 
  #2  
Old 06-18-2010
99fordranger's Avatar
Member
Join Date: Oct 2009
Location: G town, Montana
Posts: 60
Likes: 0
Received 0 Likes on 0 Posts
To my knowladge with rangers non of the kits are really engine or drivetrain specific. There are two different kinds of two wheel drive front suspensions, the coil ones and the ones with torsen bars. Check this out though theres some different lift kits here.
2WD Ford Ranger Suspension Kits
 
  #3  
Old 06-18-2010
FULLSCALE's Avatar
Level III Supporter
iTrader: (12)
Join Date: Mar 2009
Location: Clinton, Ontario
Posts: 8,184
Likes: 0
Received 4 Likes on 3 Posts
Like said above engine doesn't matter, just suspension type.
 
  #4  
Old 06-18-2010
demiseranger's Avatar
Member
iTrader: (2)
Join Date: May 2008
Location: Tucson , Arizona
Posts: 331
Likes: 0
Received 0 Likes on 0 Posts
Engine does matter... Why? Because the spring rates are different on the coils. So to keep the same ride height a heavier engine will have a stiffer coil than a lighter engine would. Basically all im sayin is that your ride may suffer a bit more but it might have a bit more lift.

But...on a SLA truck, more lift isn't necessarily better because downtravel will decrease. The upper arms will max out quicker.

This is based on experience, but don't let this stray you away. If you find a good deal, jump on it.
 
  #5  
Old 06-18-2010
99fordranger's Avatar
Member
Join Date: Oct 2009
Location: G town, Montana
Posts: 60
Likes: 0
Received 0 Likes on 0 Posts
^ Good point the kits should all bolt up the same as long as its for the right type of suspension. But Coils for your weight are a good idea, but I dont think heavier coils would be bad.
 
  #6  
Old 06-18-2010
Little Bear's Avatar
Member
Thread Starter
Join Date: May 2010
Location: Charleston, SC
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
99fordranger: That is the site where I figured out there are 2wd ones out. I'm registered with the same name over there.lol. I'm coil sprung. I kinda figured what you said, but I had to ask to be sure.

demiseranger: Yeah, I understand the spring rates are different..but like I asked, would the springs just be stiffer. Which you went on to answer what I wanted answered. Ride quality is only but so important in just a winter driver. I've got a motorcyle that I drive pretty much from the first hott day of the year till it starts getting cold. This is just to make my winter ride look sweet. Mall-crawler for sure.lol.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
safaripacific
OLD - Suspension, Tires, & Wheels
17
09-10-2012 07:08 PM
SteveOh
1" & 3" Body Lifts
11
09-13-2006 05:21 AM
garciaedgar
1" & 3" Body Lifts
36
09-04-2006 10:33 PM
Sparki
1" & 3" Body Lifts
35
08-08-2005 08:59 PM
yellerEDGEchick
Suspension Tech
23
07-06-2004 01:42 PM



Quick Reply: Suspension lift help...



All times are GMT -6. The time now is 01:45 PM.