will a spindle lift alone allow 35s?
#26
Camburgs edge kit is still only a 3.5" lift spindle. The other 2" is factored in because they want you to crank your torsion bars.
#28
no i swear up and down he has a 5.5 spindle and i went to steves offroad down here and got him to call and try to order some for my ranger and steve said that fabtech wont be distributing the 5.5in spindles for the coil sprung rangers until late july
and i swear to god on this one that was steves exact words..
and i swear to god on this one that was steves exact words..
#32
Yessick this is what your thinking of i bet http://www.ttperformanceinc.com/stor...roducts_id=234
#33
steve has owned steves offroad for over 26 years and he definitaly has his ties with many lift companys and 4wheelparts is like trying to buy a new engine for my truck in the dollar store... dont believe everything you read on the internet its a new lift it isnt spread around yet and yea i bet this is the first time yall have heard of it and this wont be the last time yall try to dawg me down and tell me im insane.. but im not.. and i am telling the god honest truth about this 5.5 SPINDLE LIFT "no TBAR crank included in this lift"
#34
#36
#37
Thats right. The spindle snout would have to come out where the LCA attaches to the balljoint or possibly lower. Its just not conceivable without some sort of extended spindle and dropped crossmembers.
#38
Ah learn something everyday anyways,
Yessick this is what your thinking of i bet http://www.ttperformanceinc.com/stor...roducts_id=234
Yessick this is what your thinking of i bet http://www.ttperformanceinc.com/stor...roducts_id=234
rrrrrr Wrong....
i am talking about a solid 5.5inches of lift from SPINDLES no torsion bar crank
and what your looking at is for a coil sprung ranger A.K.A XLT
the fabtech Ultimte lift is a completely differnt suspension lift..
and they havent even came out with the 5.5 SPINDLE lift for the coil sprung ranger yet so lets drop that subject and stick with what actualy exists ATM
thier is a 5.5 SPINDLE LIFT for 2wd EDGE rangers Torsion Bar Suspension
thier is no torsion bar crank needed for this lift you gain 5.5in of lift just from the spindles alone is my point and this is were i stand stop complaining saying im wrong ect.. just call fabtech and ask them yourself if your still in concern of disbelief
#40
If it really does exist.....then we certainly would have heard about it before you came along(nothing against you at all). You are in Kentucky, and Fabtech is based out of Southern California...why would the Southern California based company be testing product in Kentucky???? Doesn't make sence.
I still want proof. It's phisically and strengthally(is that a word)....anyway, it's impossible to simply drop the hub down 5.5" to create 5.5" lift. There's ALOT more that needs done. imo, if drop bracketry is needed and new alot taller knuckles are needed, a spindle lift that creates 5.5" of lift defeats the purpose of getting a spindle lift in the first place. Who wants a $1500 spindle lift???
I still want proof. It's phisically and strengthally(is that a word)....anyway, it's impossible to simply drop the hub down 5.5" to create 5.5" lift. There's ALOT more that needs done. imo, if drop bracketry is needed and new alot taller knuckles are needed, a spindle lift that creates 5.5" of lift defeats the purpose of getting a spindle lift in the first place. Who wants a $1500 spindle lift???
#41
rrrrrr Wrong....
i am talking about a solid 5.5inches of lift from SPINDLES no torsion bar crank
and what your looking at is for a coil sprung ranger A.K.A XLT
the fabtech Ultimte lift is a completely differnt suspension lift..
and they havent even came out with the 5.5 SPINDLE lift for the coil sprung ranger yet so lets drop that subject and stick with what actualy exists ATM
thier is a 5.5 SPINDLE LIFT for 2wd EDGE rangers Torsion Bar Suspension
thier is no torsion bar crank needed for this lift you gain 5.5in of lift just from the spindles alone is my point and this is were i stand stop complaining saying im wrong ect.. just call fabtech and ask them yourself if your still in concern of disbelief
i am talking about a solid 5.5inches of lift from SPINDLES no torsion bar crank
and what your looking at is for a coil sprung ranger A.K.A XLT
the fabtech Ultimte lift is a completely differnt suspension lift..
and they havent even came out with the 5.5 SPINDLE lift for the coil sprung ranger yet so lets drop that subject and stick with what actualy exists ATM
thier is a 5.5 SPINDLE LIFT for 2wd EDGE rangers Torsion Bar Suspension
thier is no torsion bar crank needed for this lift you gain 5.5in of lift just from the spindles alone is my point and this is were i stand stop complaining saying im wrong ect.. just call fabtech and ask them yourself if your still in concern of disbelief
#42
first i live in MOBILE,ALABAMA so i have no clue were you got kentucky from... and ya i understand your point..
but apparently if you have the money then why not...
and ya i know the 5.5spindle is a bit much and their might be things my buddy wess hasnt told me yet but i am completely positive that he has a 5.5in SPINDLE LIFT
yea it sounds crazy thats what i said till he showed me...
so yall can call fabtech and listen to what they have to say and ima go take some pictures tomorrow to get more evidence and we can get down to the bottom of this =)
but apparently if you have the money then why not...
and ya i know the 5.5spindle is a bit much and their might be things my buddy wess hasnt told me yet but i am completely positive that he has a 5.5in SPINDLE LIFT
yea it sounds crazy thats what i said till he showed me...
so yall can call fabtech and listen to what they have to say and ima go take some pictures tomorrow to get more evidence and we can get down to the bottom of this =)
#43
#44
first i live in MOBILE,ALABAMA so i have no clue were you got kentucky from... and ya i understand your point..
but apparently if you have the money then why not...
and ya i know the 5.5spindle is a bit much and their might be things my buddy wess hasnt told me yet but i am completely positive that he has a 5.5in SPINDLE LIFT
yea it sounds crazy thats what i said till he showed me...
so yall can call fabtech and listen to what they have to say and ima go take some pictures tomorrow to get more evidence and we can get down to the bottom of this =)
but apparently if you have the money then why not...
and ya i know the 5.5spindle is a bit much and their might be things my buddy wess hasnt told me yet but i am completely positive that he has a 5.5in SPINDLE LIFT
yea it sounds crazy thats what i said till he showed me...
so yall can call fabtech and listen to what they have to say and ima go take some pictures tomorrow to get more evidence and we can get down to the bottom of this =)
#45
go back to school... ha... moron
#46
#47
i understand im not trying to fight about it but i know that it is real their may be more to the lift that wess didnt point out all he showed me was the big *** 5.5in spindle and you could tell that joker wasnt no 3.5 ya thier might have been brackets of some type ect.. but like i said ill get pictures tomorrow so i can show yall and it is like a 1500$ lift to tell you the truth lol but i mean if someone wants that much lift then spend a peny or two more..
#48
O excuse me, sorry i will just agree with all the others that your an idiot. Instead of giving you the benefit of the doubt.
#50
Getting hurt? Can not take the truth that your an idiot? I do need to go to bed thats for sure but your lift thing is just cracking me and how you "SWEAR TO GOD" about everything. Maybe if you type in "Swear To God" a few more times you may convince us.....