ZR2 rear leafs
anyone ever try these on a ranger?
i may pick up a pair cheap, hope to remove the lift block. |
havent heard of that, but keep up updated on how they work...
|
Since they are made for a spring under set up and have a very high arch built into them, I think they will most likely provide to much lift and a very stiff ride.
|
do they have the same eye to eye? or are you going to be moving hangers?
|
Originally Posted by redranger4.0
(Post 903913)
do they have the same eye to eye? or are you going to be moving hangers?
|
Originally Posted by casfz1
(Post 903912)
Since they are made for a spring under set up and have a very high arch built into them, I think they will most likely provide to much lift and a very stiff ride.
|
i'm going to get some measurements, i think they may be close, one other note, the ZR2 uses a rear track bar.
|
why would they have a track bar? i thought those were for 4link's and the like?
|
Originally Posted by meemooer
(Post 903951)
why would they have a track bar? i thought those were for 4link's and the like?
|
This might be something I'd be interested in. ZR2's are axle over leaf aren't they?
|
Originally Posted by Oh5Edge
(Post 904677)
ZR2's are axle over leaf aren't they?
|
So do the 2wd S-10's have a lowering block from the factory or do the ZR2's just have lifted leafs?
|
the ZR2's have a lifted leaf in them....
|
This would be interesting. I'm curious about the length also. Good deal, Mark, if it turns out you've got something.
|
my buddy has a ZR2 if you need measurements or pics! Im interested as well. We both are planning on SAS and he may part with his rear leafs not sure yet. KEEP IT UPDATED
|
All times are GMT -6. The time now is 07:38 PM. |
© 2024 MH Sub I, LLC dba Internet Brands