For Sale: 4" Superlift - CA - Ranger-Forums - The Ultimate Ford Ranger Resource


Suspension, Tires, & Wheels Ford Ranger suspension parts, tires, and wheels, i.e. suspension lift kits, body lifts, wheels, and tires.

Closed Thread
 
LinkBack Thread Tools Search this Thread
  #1  
Old 04-01-2010
rstangboi's Avatar
Member
Thread Starter
 
Join Date: Jan 2008
Location: Davis, Ca
Posts: 2,583
4" Superlift - CA

Ok, i know ive been dragging this along but it is officially coming off next week.

Quote:
Originally Posted by rstangboi View Post
itll come with all parts and any of my spare ifs parts if wanted, including the front axle and etc. Im willing to ship but thats on you. The kit has been wheeled but the only physical damage is the front crossmember, which has a slight dent in it.

Im looking to get around $1300obo but give me your best offer!

in this kit im including the

-superlift
-2 stock driveshafts (if wanted)
-expo leafs
-all stock front end parts i have left, including control arms to steering rack.

also, to sweeten the deal, if your local and you pick it up off of me, ill throw in a sport trac silver faced cluster and a sport trac center console.

and again, shipping is all on your dime...and dont expect me to be too exited about it (honestly). I prefer local pickup and ill travel up to 2 hours out from Davis, CA.

so, with that idc how much all the other SLs have been going for, Im listing this at $1300 obo.

hell of a deal imo because your getting a cluster/console that i wanted to sell for a total of $100, two driveshafts that go for about $50 each, expo leafs (so you dont have to stack your blocks and use new ubolts) that go for $75 at pick n pull, all the old parts like control arms with decent condition balljoints, cv shafts, rotors and etc, PLUS the superlift itself.

Feel free to pm me with any questions and if you have any burning questions my phone # is 530-400-3497 (i prefer texts since im always at work)

And also, DONT ask me to sell parts seperate. This goes as a PACKAGE only.


BUY THIS SO I CAN BUY A WELDER PLEASE!

Last edited by rstangboi; 04-07-2010 at 04:13 AM.
  #2  
Old 04-01-2010
Sonic04Edge's Avatar
RF Veteran

iTrader: (6)
 
Join Date: Jun 2004
Location: Madison. AL
Posts: 5,715
this wont last long
  #3  
Old 04-01-2010
rstangboi's Avatar
Member
Thread Starter
 
Join Date: Jan 2008
Location: Davis, Ca
Posts: 2,583
Quote:
Originally Posted by Sonic04Edge View Post
this wont last long
i hope so. ive spent so much on my sas i need to get some money back.
sad part is, this wouldnt even cover the cost of my axles....
  #4  
Old 04-01-2010
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
 
Join Date: May 2005
Location: Boring, Oregon
Posts: 21,721
Sounds to be perfect for the 2wd Edge to convert AND lift!! Minus Tcase and trans crap.

Good luck on the sale, Randy.
  #5  
Old 04-01-2010
03 Army Ranger's Avatar
Member
 
Join Date: Oct 2007
Location: Minnesota
Posts: 189
Man I want this! But I'm in Korea, and shipping would be... just a little much! Not to mention the divorce that would follow!

Good luck on the sale, someone is gonna get a great deal!
  #6  
Old 04-01-2010
RangerJustin's Avatar
Member
iTrader: (1)
 
Join Date: Feb 2005
Location: SoCal
Posts: 4,428
Crap...not yet! No funds!
  #7  
Old 04-01-2010
rstangboi's Avatar
Member
Thread Starter
 
Join Date: Jan 2008
Location: Davis, Ca
Posts: 2,583
Quote:
Originally Posted by RangerJustin View Post
Crap...not yet! No funds!
hah you sure? i sweetened the deal even more than what i had for you last time!!

also, if whoever buys it has a 98-00 ranger, ill throw in some clear headlights for em too.
  #8  
Old 04-02-2010
LuckyRanger13's Avatar
Member
iTrader: (1)
 
Join Date: Nov 2007
Location: Santa Fe, TN
Posts: 554
Shipping to TN would be outrageous..... darnit....
  #9  
Old 04-02-2010
rstangboi's Avatar
Member
Thread Starter
 
Join Date: Jan 2008
Location: Davis, Ca
Posts: 2,583
Quote:
Originally Posted by LuckyRanger13 View Post
Shipping to TN would be outrageous..... darnit....
its up to you man. but i would still throw in all the extras for anyone also if theyre willing to pay shipping for those too.
  #10  
Old 04-02-2010
sullys_ranger's Avatar
Member
 
Join Date: Mar 2006
Location: NewLexington, Ohio
Posts: 3,615
promise you my first born... when it happens....
  #11  
Old 04-03-2010
rstangboi's Avatar
Member
Thread Starter
 
Join Date: Jan 2008
Location: Davis, Ca
Posts: 2,583
bump
  #12  
Old 04-03-2010
RLong31's Avatar
The Ban Hammer
iTrader: (5)
 
Join Date: Jul 2009
Location: Monrovia, IN
Posts: 2,629
I want this, but not for 1300. Don't need all the extra goodies either. Drive shafts, spare stock parts, console, cluster etc... would you come down on the price if it didn't include all that stuff?
  #13  
Old 04-03-2010
rstangboi's Avatar
Member
Thread Starter
 
Join Date: Jan 2008
Location: Davis, Ca
Posts: 2,583
Quote:
Originally Posted by RLong31 View Post
I want this, but not for 1300. Don't need all the extra goodies either. Drive shafts, spare stock parts, console, cluster etc... would you come down on the price if it didn't include all that stuff?
not much. thats the price i want to sell it as and im throwing those parts in as a bonus.

pm me your offer if your serious.
  #14  
Old 04-03-2010
RLong31's Avatar
The Ban Hammer
iTrader: (5)
 
Join Date: Jul 2009
Location: Monrovia, IN
Posts: 2,629
It would have to wait a couple months until I can get some money together. Might be getting ready to buy some wheels/tires in a few days. Not even 100% sure it would work for my truck. I was just a little curious. I don't have anywhere to store stuff. Good luck with the sale. I'm sure someone will pick it up before I can come up with the money.
  #15  
Old 04-05-2010
rstangboi's Avatar
Member
Thread Starter
 
Join Date: Jan 2008
Location: Davis, Ca
Posts: 2,583
bump
  #16  
Old 04-05-2010
01RangerEdge's Avatar
Scrambles the DeathDealer
iTrader: (11)
 
Join Date: Jul 2009
Location: Jackson, MO
Posts: 7,598
So the center console is an extra? And you're not selling it separate?
  #17  
Old 04-06-2010
RangerJustin's Avatar
Member
iTrader: (1)
 
Join Date: Feb 2005
Location: SoCal
Posts: 4,428
Quote:
Originally Posted by rstangboi View Post
hah you sure? i sweetened the deal even more than what i had for you last time!!

also, if whoever buys it has a 98-00 ranger, ill throw in some clear headlights for em too.
yea...just bought a rock for the lady's finger...
  #18  
Old 04-07-2010
rstangboi's Avatar
Member
Thread Starter
 
Join Date: Jan 2008
Location: Davis, Ca
Posts: 2,583
Quote:
Originally Posted by RangerJustin View Post
yea...just bought a rock for the lady's finger...
congrads man.

and with that, i present this

Name:  100_1124.jpg
Views: 1
Size:  77.0 KB

Name:  100_1126.jpg
Views: 3
Size:  105.6 KB

its all out, tried to take it apart as a whole but i did what i could.
but its out and ready!!
  #19  
Old 04-07-2010
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
 
Join Date: May 2005
Location: Boring, Oregon
Posts: 21,721
not to hack...but you destroyed those CV's....
  #20  
Old 04-07-2010
rstangboi's Avatar
Member
Thread Starter
 
Join Date: Jan 2008
Location: Davis, Ca
Posts: 2,583
Quote:
Originally Posted by Fx4wannabe01 View Post
not to hack...but you destroyed those CV's....
i figured. i went out twice trying to find the stupid socket to get the nut off but i never got the right one...kinda got pissed off and ripped it out. oh well right? lol
  #21  
Old 04-07-2010
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
 
Join Date: May 2005
Location: Boring, Oregon
Posts: 21,721
Coulda just took a pry bar or even screwdriver to the gap between the axle housing and that fat part of the CV. I've done that lots of times.....still in the truck and all. But...what can ya do? nada. lol.
  #22  
Old 04-07-2010
rstangboi's Avatar
Member
Thread Starter
 
Join Date: Jan 2008
Location: Davis, Ca
Posts: 2,583
Quote:
Originally Posted by Fx4wannabe01 View Post
Coulda just took a pry bar or even screwdriver to the gap between the axle housing and that fat part of the CV. I've done that lots of times.....still in the truck and all. But...what can ya do? nada. lol.
i tried for all of 30 seconds to do that lol, but like i said, i was pissed off....but ya, again all the other parts are a bonus right? and it was nasty in there anyways lol.

btw, thinking back on it...my friend took his cv's apart once and put em back together...porche 944, just to regrease em...i guess that was bad?
  #23  
Old 04-08-2010
rstangboi's Avatar
Member
Thread Starter
 
Join Date: Jan 2008
Location: Davis, Ca
Posts: 2,583
bump. i want this gone!!
  #24  
Old 04-10-2010
rstangboi's Avatar
Member
Thread Starter
 
Join Date: Jan 2008
Location: Davis, Ca
Posts: 2,583
bump, seeing as my daily is probably totalled...i need money for another car...sadly.
  #25  
Old 04-12-2010
rstangboi's Avatar
Member
Thread Starter
 
Join Date: Jan 2008
Location: Davis, Ca
Posts: 2,583
bump. price is obo, gimme an offer
Closed Thread

Related Topics
Thread Thread Starter Forum Replies Last Post
Checking Interest: 4" Superlift / 3" PA Body Lift. Corvallis, OR cr4894 Suspension, Tires, & Wheels 4 04-28-2013 09:39 PM
Using the Superlift 4" Blocks Instead of the 3" Kosmo04 Suspension Tech 7 02-01-2010 01:59 PM
4" Superlift, 3" Body Lift, with 33" Tire Pic Request blue_oval 1" & 3" Body Lifts 29 01-24-2010 08:41 PM
checking interest: "superlift to coilover" hardware(TX) shadow905 Suspension Tech 173 08-12-2009 06:17 AM
Superlift with 4" or 6" Skyjacker Leaf Springs?? KLC Suspension Tech 7 06-26-2009 08:27 AM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -6. The time now is 07:18 AM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.