Add A Leaf?!?
 

I wanna help but I can't describe it. I need to see the area to describe it better.

We took one spring plate off at a time (driver side) and loosened the other (passenger side). Let the pack separate a little so we could fit the AAL in. Centered everything and made it snug so we could do the passenger side. Once both sides had AAL's installed we tightened everything down.
I had to get a couple washers for the centering pins since I couldn't tighten it down as my socket wouldn't reach over the pins.
I put the washers on top of the top leaf and snugged it down.

Wirelessly posted (iPhone 4)

There's really only one way to install them. Morris summed it up

arn't there a bunch of different types of AALs?

Edit: Never mind I was thinking of helper springs/load springs...

This Link might be useful to you. Pretty much same setup as rangers.

Holy crap, I did gave good advice!?!

....er' I mean, yea. Thats how it's done.

make sure you re-tighten the ubolts after you drive on it a bit as well!