Want to Buy: Torsion bar keys (MI)
#1
Torsion bar keys (MI)
i dont need to hear how bad keys are for everything blah blah and that they will ruin everything...looking for a set for cheap to experiment with...not the stock or "pre key" ones but some of the lift ones that everyone hates
#3
well i have already had mine off when i put the bars in, itll take me 20 mins tops to install them...im gonna max them today how they are and see what i get out of them
#10
Member
iTrader: (2)
Join Date: Jan 2008
Location: Cary, IL
Posts: 801
Likes: 0
Received 0 Likes
on
0 Posts
ive had mine sence 07-08ish and no problems! they are a b*tch to put in. the flange where you clamp on the puller bent on my truck so i had to use a chain over that cross member. Hope you dont have any problems i wanna see how high you can go sence our trucks are basically gonna be the same set up.
#15
im also interested. im just not happy with the lift with my stock torsion bars. and no way im dishin out over a G for a suspension lift.
i would just have no idea how to install them.
i would just have no idea how to install them.
#16
It's not that hard. More time consuming than anything. Search on here. I think there may be a how-to.
#18
time consuming... **** we did t-bar swap on my truck in 28 min flat for both bars.. i dont see it being much different
#20
as zach said THIS IS NO BIG DEAL. if it takes more than an hour to install both, somethings wrong. you need a 10mm socket, 13mm socket, 2 jaw puller and an air hammer or normal hammer. you guys are over thinking it
Thread
Thread Starter
Forum
Replies
Last Post
01RangerEdge
OLD - Suspension, Tires, & Wheels
7
01-10-2013 05:01 AM
Want to Trade: my 05 t-bar keys and $ for your 07 or newer keys (ga)
imprezu
OLD - Suspension, Tires, & Wheels
7
10-18-2010 11:31 PM
RangerNVS
OLD - Suspension, Tires, & Wheels
26
01-22-2010 10:28 AM