Vehicle & Meet Videos Share videos of vehicles and/or meet and greets in this sub-forum.

Trailing vids

  #1  
Old 07-13-2009
Seb_L's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jun 2009
Location: Ottawa, Ontario
Posts: 1,071
Likes: 0
Received 1 Like on 1 Post
Trailing vids

Headed out to a new trail with a friend. Crappy cell phone vids but they're vids none-the-less! Water in one of the vids you can sort of see was over the liscence plate most of the time and above the headlight for a split second. These were all in 2wd.

Enjoy!

Truck Offroad :: trucks016.flv video by 08_FX4 - Photobucket
Truck Offroad :: 0712092009.flv video by 08_FX4 - Photobucket


Buddy said the exhaust was under water

Truck Offroad :: 0712092014.flv video by 08_FX4 - Photobucket

Headlight at around 10secs

Truck Offroad :: 0712092018.flv video by 08_FX4 - Photobucket

This spot was VERY awkward. Went down 2 feet, then back up with a big boulder in the middle (hit my skid plate), then back down to the bottom of that hill covered in mud and boulders. All this, was within 10' so the hills were super steep. Coming back I was super scared of ripping the front end off. Anyways, onto the vid.

Truck Offroad :: 0712091942.flv video by 08_FX4 - Photobucket
 
  #2  
Old 07-21-2009
hozII's Avatar
Member
iTrader: (5)
Join Date: Sep 2008
Location: athens, Al
Posts: 2,245
Likes: 0
Received 0 Likes on 0 Posts
nice vids, but to let ya know your heads never went under water that was the wave you created when you hit the water and it was more like a sec lol!! Get a BL and some 33's and you wont have that groundin out on those lil rock probs anymore...lift lift lift!!!
 
  #3  
Old 07-21-2009
Seb_L's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jun 2009
Location: Ottawa, Ontario
Posts: 1,071
Likes: 0
Received 1 Like on 1 Post
I'm just going by what my buddy said lol but it makes sense. Lift is in the future but for now it'll be Prekey, shackles, Preblock THEN BL. I just have no idea how to go about extending the brake lines.. 33's even later on when my 265's wear out.
 
  #4  
Old 07-22-2009
hozII's Avatar
Member
iTrader: (5)
Join Date: Sep 2008
Location: athens, Al
Posts: 2,245
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Seb_L
I'm just going by what my buddy said lol but it makes sense. Lift is in the future but for now it'll be Prekey, shackles, Preblock THEN BL. I just have no idea how to go about extending the brake lines.. 33's even later on when my 265's wear out.
I would just do a torsion bar crank and shackle's. DONT do the torsion keys..there junk!!! and what is preblock? and why would you have to extend your brake lines?
 
  #5  
Old 07-22-2009
Seb_L's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jun 2009
Location: Ottawa, Ontario
Posts: 1,071
Likes: 0
Received 1 Like on 1 Post
I have my bars cranked right now and AAL. But the keys are the stock ones from 07 and older models, they lift 08+ about 1.5". The block is the same concept as the keys, 07 and older model block are 1" higher.

Dont you have to extend brake lines with a BL?
 
  #6  
Old 07-22-2009
Tremor05's Avatar
Member
Join Date: Dec 2008
Location: Red Deer, Alberta
Posts: 228
Likes: 0
Received 0 Likes on 0 Posts
the only thing a body lift does is LIFT the BODY from the frame any nothing else goes up everything stays the same but you will need to extend some stuff like fuel neck, rad etc but that is all included with the kit(or should be) but there is no need to extend the brake lines because there is no change is suspension height.
 
  #7  
Old 07-22-2009
Seb_L's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jun 2009
Location: Ottawa, Ontario
Posts: 1,071
Likes: 0
Received 1 Like on 1 Post
Ah ok thanks
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Off Road Warehouse
Off Road Warehouse
5
11-11-2010 10:24 AM
JoeyJoeJ0
Snapshots
13
04-13-2009 07:07 AM
Mike9825
General Ford Ranger Discussion
4
07-21-2006 02:16 PM
jrpro130
Audio & Video Tech
17
03-05-2006 07:36 PM


Thread Tools
Search this Thread
Quick Reply: Trailing vids



All times are GMT -6. The time now is 06:58 PM.