1" wider with negative offset
Thread Starter
|
Member
Joined: Jul 2017
Posts: 6
Likes: 0
From: Burleson, Texas
1" wider with negative offset
I have a stock 2011 XL 2wd. I'm running 30 x 9.5 on the stock 15 x 7. My question is can I fit a 15 x 8 with -19 offset with the same sized tire without any rubbing or anything?
Thanks,
Turfguy
Thanks,
Turfguy
Thread Starter
|
Member
Joined: Jul 2017
Posts: 6
Likes: 0
From: Burleson, Texas
Lol nah I think I'm going to go with these with the -19 offset https://www.4wheelparts.com/Wheels/W...ZH8aAjip8P8HAQ
This weekend I'm going to replace my front rotors and pads as well as my front shocks. I will do the rear shocks a little later. My tires are still in decent shape but when it gets closer to getting new ones I will get those wheels and go with BFG KO2 All Terrain in the same 30x9.5 size
This weekend I'm going to replace my front rotors and pads as well as my front shocks. I will do the rear shocks a little later. My tires are still in decent shape but when it gets closer to getting new ones I will get those wheels and go with BFG KO2 All Terrain in the same 30x9.5 size
Member
Joined: Feb 2017
Posts: 92
Likes: 0
From: Orlando, Fl
Those wheels are called D windows . I don't know how the 3.75 back spacing will
be.I know my 4" back space is perfect.You should be all right,there's only 1/4"
difference.But I'm not positive.
Old retired guy
See my wheels @ tires on my album.
be.I know my 4" back space is perfect.You should be all right,there's only 1/4"
difference.But I'm not positive.
Old retired guy
See my wheels @ tires on my album.
Thread Starter
|
Member
Joined: Jul 2017
Posts: 6
Likes: 0
From: Burleson, Texas
Yeah, I will have to look into see if they will still work. I would think that small of a difference wouldn't matter but you never know.
Wheels and tires are nice! Also the trim on your truck looks great, mine is pretty faded haha. How did you get it to look basically new??
Wheels and tires are nice! Also the trim on your truck looks great, mine is pretty faded haha. How did you get it to look basically new??
Member
Joined: Feb 2017
Posts: 92
Likes: 0
From: Orlando, Fl
wheels
attention: Turfguy
When i bought my truck,the first thing i did,was replace my front blue grille emblem.
I've clay barred my truck 3 times,since i've had it.With countless coats of wax.Your 2011 must not have been taken care of,a good claybarring and wax
should take care of your paint.The moulding i have is 2"body moulding.Besides that,and my wheels@tires,i like to keep it stock looking.No flashy junk.
You should start a project log thread,then i can go into much more detail,because we're on the tires and wheels section.
Let me know !!
see ya,old retired guy
When i bought my truck,the first thing i did,was replace my front blue grille emblem.
I've clay barred my truck 3 times,since i've had it.With countless coats of wax.Your 2011 must not have been taken care of,a good claybarring and wax
should take care of your paint.The moulding i have is 2"body moulding.Besides that,and my wheels@tires,i like to keep it stock looking.No flashy junk.
You should start a project log thread,then i can go into much more detail,because we're on the tires and wheels section.
Let me know !!
see ya,old retired guy
Thread
Thread Starter
Forum
Replies
Last Post
