Ok, Im going to order my tires today. My question is, with my lift what size should I get. I am putting on 3" BL, 3" spindles, 2"aal, 2" shackles, 2" blocks.

 

Info on the truck???? Coil sprung or Torsion bar equipped???

Coil sprung : 33's
Torsion bar : 35's

 

im sure his is coil sprung i would get the 33's

 

Its torsion. The reason I ask, is because I have seen good looking trucks with 33"s that have the same setup, But in my opinion he bigger the better.

 

Heres a pic of what 35's would look like on a 2000 xlt 4X4
now this is w/o the lift, but it will give you a general idea

 

As far as specs go it is a 01 edge. 4.0 SOHC. 4.10's in the rear.

 

ya i would stay with the 33's. do you off road alot?

 

35's, no doubt. Since you are an Edge.

Brenton

 

Yeah, if you have 4.10's go with the 33's, if you go with 35's youll have to regear to 4.56

 

cute daughtermm nice truck,, ur a lucky man,,,, wut lift u got on that??? those loook snugg, in there.,., i would go with 33,, u can do it without regearin,,

 

Most of my offroading is dirt trails, with some uneven terrain. There is a little mud but not alot. The only problem with the mud is it is Georgia red clay and that stuff is sticky. I found some BFG's and Goodyears for about 185 a piece. If anyone finds any cheaper let me know.

 

Thanks!! That is my niece, although i have practically raised her since she was born..Those are my two girls

 

discounttires.com (its not the discount tires youre thinking of, thats tires.com) You can get some kumho venture M/Ts for around $130 a peice.

 

dont get ventures get bfg a/ts i hate my kumho's i want bfgs bad.

 

35ssss all day long. And you already have 2" blocks in the rear, don't stack them.

 

Im not gonna stack them. Im taking out the stock ones and putting in new ones.

 

can i run 35`? or 33`s? i off road, im a mud man,,. rocks here n there,, i got 3.0 wut would i have to do to accomedate for 35`s?

 

But you already have 2" blocks, that wouldn't make a difference.

 

For 35s you need to run 4.88 gears and you can fit 35s with a BL but I would double lift it.

 

how much r they n where do i get em? idk wut axle i have ,,, i got a 99 xlt 4x4offroad..3.0,, i got a freind who can install them for cheap

 

Summitracing.com has everything you'll need. Look at the sticky on the Drivetrain section and you can figure out what axle you have.

 

The stockers are that poly crap and the ones im putting in are nylon composite, just a little stronger and they were free so Im not complaining.

 

Ah didn't know that, that makes sense then lol. Can't beat free

 

35's all the way!