Originally Posted by Redneckstone
honistly i dont see why not, you can fit 35's on a 2wd drive edge spindle lifted... with a body lift you should be fine with 37's arnt you all forgetting the Red edge in FL before its SAS with what was it 38's???
|
Originally Posted by ryanrebel125
yeah jesses were 39.5 tsl. no rubbing.
http://memimage.cardomain.net/member...49_73_full.jpg |
i just dont see how he did it and Ricky is taken measurements and is thinkin he can barley hit a 37 where jessie hit 3 more inches then what ricky is plannin..
|
i don't care how he did it but thats hotness right there...
i love this picture.. stock edge meet your papa!!!! http://memimage.cardomain.net/member...49_96_full.jpg |
Originally Posted by Redneckstone
i don't care how he did it but thats hotness right there...
i love this picture.. stock edge meet your papa!!!! http://memimage.cardomain.net/member...49_96_full.jpg look how tight those tires are though....that looks really like c-r-a-p, crap! no wheel travel what so ever! if his wheel moves 1" up it rips a fender off.... |
Originally Posted by lifted97ranger
that thing has GOT to have more than just a spindle lift.....
look how tight those tires are though....that looks really like c-r-a-p, crap! no wheel travel what so ever! if his wheel moves 1" up it rips a fender off.... And I know that Mazda fenders are the same, cuz those were the ones that came off my truck. The only thing is that the bulge maybe a 1/2 in. But that has nothing to do w. tire fitment. The fender 'lip' is the same as the Ranger ones... Brenton |
Gumby's fenders are off a Mazda and they are not even close to the same thing as a Ranger......
|
Originally Posted by lifted97ranger
that thing has GOT to have more than just a spindle lift.....
look how tight those tires are though....that looks really like c-r-a-p, crap! no wheel travel what so ever! if his wheel moves 1" up it rips a fender off.... |
4 Attachment(s)
ive got more ill have to find em.
Attachment 210902 Attachment 210903 Attachment 210904 Attachment 210905 |
Originally Posted by lifted97ranger
Gumby's fenders are off a Mazda and they are not even close to the same thing as a Ranger......
Brenton |
Originally Posted by EdGe_wannabe
Dude, those fenders came off of my truck. I know what they looked like. They are the same. I put a Mazda fender on one side and a ranger fender on the other & the ONLY difference was where the fender meets the corner light...
Brenton |
Originally Posted by EdGe_wannabe
Dude, those fenders came off of my truck. I know what they looked like. They are the same. I put a Mazda fender on one side and a ranger fender on the other & the ONLY difference was where the fender meets the corner light...
Brenton |
Originally Posted by ryanrebel125
dude jesses like one of my best friends. spindle and body. and no they didnt rub. and yes he took it off road.
|
Originally Posted by offroad_ranger
I agree with brenton.. since he infact does own a mazda and converted it to a ranger
|
Originally Posted by lifted97ranger
I DONT CARE IF HE IS YOUR BROTHER! it looks like C-R-A-P, CRAP or S-H-I-T however you want to put it......way too much tire and not enough fender clearance
|
Originally Posted by ryanrebel125
wow un bunch your panties. thats your thoughts on it, not everyones. this thread isnt about how it will look, its about if there gonna fit or not. so back on topic.
Brenton |
Originally Posted by ryanrebel125
wow un bunch your panties. thats your thoughts on it, not everyones. this thread isnt about how it will look, its about if there gonna fit or not. so back on topic.
|
I dunno, there is no way I could fit 35's on just my spindles.
Griggs can fit them b/c he has no valence, and he pulled back his flares. His clearance is tight though... I probably could fit 37's, but I know they would rub pretty bad...if I only have 3" of clearance now...thats not lookin too good for 37's.. The only comment I have on jesses, besides that it's a badass truck, is that his is a flareside, I have a fleetside, so there is no way I could fit a 39.5.. Although ryans tires looked like they would have fit, I shoulda tried them on...we kinda ran out of time though. I dunno, I just have major doubts they would fit. I really can't see them fitting... I'll prolly end up with either a 35" ssr radial or mtz, I love the ssr's... I got 5 full inches with my spindle/tbar crank (not to the max) and I just recently maxxed out the tbars, so I'm probably at 5.5 My spindles did give me more than 3 though...prolly 3.5...at least. We'll see, I mean the fact is, I have 3" clearance at the tightest points on a 33" bfg at...they run small (I'm sitting at a little under 32.5" right now) so I think a 35" ssr would fill up nicely. |
and I could swear I HEARD (never seen) mazda fenders are flared and their fender flares are different. It's like a 1" bulge and a 1.5" rise IIRC...but thats only hearsay.
f' it, I'll prolly get 37" ssr radials... i dunno why i'm makin it hard on myself, if they don't fit, I cut!!!!!!!!! :fing26: |
ricky come up here, you can try my tires on. then you can show everyone how they fit and how they look.
|
Originally Posted by ryanrebel125
dude jesses like one of my best friends. spindle and body. and no they didnt rub. and yes he took it off road.
|
Originally Posted by ryanrebel125
ricky come up here, you can try my tires on. then you can show everyone how they fit and how they look.
|
Originally Posted by jrpro130
and I could swear I HEARD (never seen) mazda fenders are flared and their fender flares are different. It's like a 1" bulge and a 1.5" rise IIRC...but thats only hearsay.
If I were you I would go with 35s or go up to Ryans and test fit first before buying. |
1 Attachment(s)
heres mine with the 4 superlift and 3 body. 38.5x15 boggers on 15x10 wheels. no rubbing.
http://i21.photobucket.com/albums/b2...bel125/now.jpg http://i21.photobucket.com/albums/b2.../jun14_001.jpg http://i21.photobucket.com/albums/b2...14-2005-01.jpg http://i21.photobucket.com/albums/b2...14-2005-12.jpg hey zach this is for you. 35x16x15 boggers on 15x10 wheels. with just the 3 in body lift. Attachment 210899 |
Originally Posted by ryanrebel125
heres mine with the 4 superlift and 3 body. 38.5x15 boggers on 15x10 wheels. no rubbing.
http://i21.photobucket.com/albums/b2...bel125/now.jpg http://i21.photobucket.com/albums/b2.../jun14_001.jpg http://i21.photobucket.com/albums/b2...14-2005-01.jpg http://i21.photobucket.com/albums/b2...14-2005-12.jpg hey zach this is for you. 35x16x15 boggers on 15x10 wheels. with just the 3 in body lift. http://i21.photobucket.com/albums/b2...ebel125/my.jpg |
All times are GMT -6. The time now is 09:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands