what width and back space should i get
#1
Join Date: Aug 2007
Location: Golden, CO
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
what width and back space should i get
ill be ordering some 32x11.5x15 MTRs on monday and some new 15 inch wheels as mine are currently 16s.
i did search but didnt find what i was lookin for. will a 8 inch wheel be ok for the 32s or should i get 10? and which back spacing will look better and keep me from eating my tires and fenders up 3.75 or 4 inch???
oh ya, i am probably gettin the cragar black street locks.
i did search but didnt find what i was lookin for. will a 8 inch wheel be ok for the 32s or should i get 10? and which back spacing will look better and keep me from eating my tires and fenders up 3.75 or 4 inch???
oh ya, i am probably gettin the cragar black street locks.
#2
#4
Join Date: Aug 2007
Location: Golden, CO
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
#5
Join Date: Aug 2007
Location: Golden, CO
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
8" rim is perfect for 11.50's. I'd suggest a 4" or 3.75" backspace....it'll bring the tire flush with the flares. 4" is more sucked into the wheelwell than 3.75". I've got pics i'll post when I get back home of my old setup(15x8 w/ 4" backspace & 32x11.50s, stock height)
#7
#8
#12
Join Date: Aug 2007
Location: Golden, CO
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
#13
#14
Join Date: Aug 2007
Location: Golden, CO
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
#16
Yea man...your bars are barely cranked it looks like. I barely cranked mine with the 265's back in the day. Your fine. AND it doesn't look half bad having a 1" gap between the valenceless bumper and the grille. Have you seen my 1" BL rear bumper gap filler? I've got a thread on it, and I added it to the 1" BL thread.
#17
Join Date: Aug 2007
Location: Golden, CO
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
#19
My stock bars were pretty saggy(85k).....I had "B" bars and upgraded to "#1" bars when I put the superlift on...might wanna think about that possibly. What bars do you have now? Open your driver door, and look at the tag.....Under the "SPR", what does it say? Should say something like "BBKK".
#20
Join Date: Aug 2007
Location: Golden, CO
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
#21
These are the #'s I ordered....
You should be able to order #1 bars from a Ford dealer for about $65 each. They are cheaper online but I have to believe that shipping would eat up the difference. Be sure to take the part numbers with you because, at the dealer, replacement bars are looked up by VIN based on the original build.
#1 part numbers:
F67Z-5B326-FA Pass side
F67Z-5B326-FB Driver side
Originally Posted by rwenzing
You should be able to order #1 bars from a Ford dealer for about $65 each. They are cheaper online but I have to believe that shipping would eat up the difference. Be sure to take the part numbers with you because, at the dealer, replacement bars are looked up by VIN based on the original build.
#1 part numbers:
F67Z-5B326-FA Pass side
F67Z-5B326-FB Driver side
Thread
Thread Starter
Forum
Replies
Last Post
BIG45-70
Interior Semi-Tech
14
12-20-2010 09:32 PM
vansnxtweek
4.0L OHV & SOHC V6 Tech
17
08-13-2008 03:10 PM
ThsIsSktboarding
Audio & Video Tech
19
12-03-2007 12:30 PM