rockstar fitment?
 

im still astonished by the fact that i found rockstars that will fit a ranger bolt pattern.

gotta love Alon at mod bargins.....
before i order them (after next paycheck) i wanna know how they fit.

now, it says the offset is 0 and the backspace is 5"
how will they fit??

.......are they even going to clear the calipers???

i really really wanna know, since im pretty much saving up 2 months worth of paychecks for this new set (including tires) and dont wanna waste my time just to find out that they dont fit right at all...

thanks
randy

bump!!

There was a member here that had them....but i believe he bought blanks and had them drilled because they didn't make our bolt pattern.

5" backspace is actually quite a bit.. what size wheels are you going by chance? 15's? 16's?, 8 inch? 10 inch?

Anythign larger then a 15x8 can fit over teh caliper just fine.. although, with a 5" backspace.. you -may- need to look into it a little more with soem measurements.

https://www.ranger-forums.com/forum2...ight=rockstars

Member: 93venom

http://www.radfox.com/myspace/ken/ken1.jpg

http://www.radfox.com/myspace/ken/ken3.jpg

Ohh yeah!! I remember that truck, Shane! Thanks for posting up.. i almost forgot about it.. looks awful sharp with those things on! =) it takes some big meats to set it off though, go wth at least 12.5's and 33's with them suckers ;)

yeah i remeber him too that backspacing is kinda high

but like stated before make sure you get a wide tire

http://www.modbargains.com/product.a...r_XD_Ranger_MW

im gettin the 18x9's

and im still undecided on tires....cuz im tryin to keep it under $220 a tire.....

he just sold that truck on my local craigslist a while back he had 18s as well i believe

ya......18's.

depending on how much they dish, a 5 inch BS is a TON and will put that tire in way far. On most 10" rims they run about a 4 inch BS to keep it comfortable and keep the tires from rubbing like crazy. You may want to look into a 1.25" wheel spacer set if you plan to run a 33x12.5 on those rims to get the BS out to like 3.75, you will also like where the tires sit in the wheel well better with it spaced out like that. But if it's truely a 9" rim than a 0 offset should only be a 4.5" BS which is the factory rim spacing, of course with 33x12.5s it will probly still rub if it is 4.5" BS.

so basically ur saying......try em....n dont be surprised if i have to buy spacers?

yep 5in bs + 33x12.5 = rubbing

The pics i posted....he's definately got adapters.

well im angered.....
i cant go from spending 1400 dollars to 1500 to 1800 dollars.....
its just not even close to being practical now...

guess its time to pick some new rims out....
this SUCKS.

Might I suggest these:

http://www.modbargains.com/product.a...lack_Ranger_MW
http://www.modbargains.com/zoom_img/...1210002907.jpg

There's a newer tacoma here with those on it, and i love the way it looks....i suggest those if your into the aluminum wheel coated look...like the rockstars. But then again...i havn't looked up the specs on them.

the 15x7's and 16x8's have an "acceptable" backspacing..

but u'd have to show me a pic...cuz those rims alone....dont really get me at all...

i was leaning towards the rougue gloss ones..
http://www.modbargains.com/product.a...lack_Ranger_MW

nope no adapters spacers maybe wait probably spacers yea he wouldnt have cleared 35s without them
he bought blank wheels and had them drilled for 5x4.5