changing wheels, 15x8 to 15x10 question
#1
#2
#5
well i think i'm getting some 15 x10 dick cepek dc- 1's. now my mtrs should be fine right? i just wanna make sure here. i have ran 15 x 8's for about 3 or 4k, and with these new 15 x10's it should roll even smoother? because i've had trouble getting them balanced correctly, on the highway they tend to wobble , thanks
#7
Originally Posted by jrpro130
They should actually wear better. Your contact patch will be more even (flat).
I have 15x8's on 12.5 wide tires and I am at 20psi and still have 1/4" not touching on each side. That can cause uneven tire wear.
If I had 15x10's, I could be at 30 psi and have the full tire touching
I have 15x8's on 12.5 wide tires and I am at 20psi and still have 1/4" not touching on each side. That can cause uneven tire wear.
If I had 15x10's, I could be at 30 psi and have the full tire touching
#9
Originally Posted by l2en
Damn, my cooper's are suppose to be @ 50psi cold.
Thread
Thread Starter
Forum
Replies
Last Post
jrpro130
Wheels & Tires Semi-Tech
27
05-01-2006 06:15 PM