1 '' body lift
#1
1 '' body lift
Im gonna do the 1'' body lift on my truck but before I start I would like to get the correct bolt sizes, because it looked like there was two different sets of measurments and then one was changed? Also do these bolts need to be grade 3,5, or 8 and do they need to be fully threaded. And if there is any special kind of nut I need to get to bolt it all teogeath
#3
Originally Posted by rangerdan01
Im gonna do the 1'' body lift on my truck but before I start I would like to get the correct bolt sizes, because it looked like there was two different sets of measurments and then one was changed? Also do these bolts need to be grade 3,5, or 8 and do they need to be fully threaded. And if there is any special kind of nut I need to get to bolt it all teogeath
Why just 1" b/l?
#4
grade 10.9. std grade 8 = metric grade 10.9. std grade 5 = metric grade 8.8. On my brother's '01 xcab, we ordered the sizes specified in that 1"body lift thread. I think we changed things up....used 100mm on the core support. And we reused the rear cab bolts and put them in the front cab bolts. They don't have to be fully threaded. Cost was like $35 for the bolts, and $25 for the spacers.
1" BL, torsion crank, and 32s....
1" BL, torsion crank, and 32s....
#5
Originally Posted by gumby
you will need these bolts to get the job done
(2) 12x1.75x110mm
(8) 12x1.75x130mm
(2) 12x1.75x150mm
these numbers are ~30mm longer than the stockers.
dont forget washers. i used 1/2" washers, they are cheaper. fender washers in the bed.
you will need these bolts to get the job done
(2) 12x1.75x110mm
(8) 12x1.75x130mm
(2) 12x1.75x150mm
these numbers are ~30mm longer than the stockers.
dont forget washers. i used 1/2" washers, they are cheaper. fender washers in the bed.
so will these be the bolt sizes that i need to complet the lift?
I chose the 1'' because i dont like the way the 3'' looks and i dont have money for bigger tires.
#6
Thread
Thread Starter
Forum
Replies
Last Post
Alon
OLD - Suspension, Tires, & Wheels
10
07-20-2009 01:08 PM