1" & 3" Body Lifts General discussion of body lifts for the Ford Ranger.

2011 ford ranger body lift

Thread Tools
 
Search this Thread
 
Old Jul 28, 2011
  #1  
anger11''s Avatar
Thread Starter
|
Member
Joined: Jul 2011
Posts: 12
Likes: 0
From: newfoundland
2011 ford ranger body lift

Hey guys im new to this fourm, alot of great information on here. Back in jan I bought a 2011 Ranger sport 4x4 with the manual trans. Im looking for a 3in body lift but all I can find is 2010's. Just wondering if a 2010 bl will fit a 2011? any info would be a great help. thanks
 
Reply
Old Jul 28, 2011
  #2  
djfllmn's Avatar
Former Ford Parts Monkey
Joined: Mar 2009
Posts: 6,106
Likes: 56
From: PA
its the same
 
Reply
Old Jul 28, 2011
  #3  
dixie_boysles's Avatar
Member
iTrader: (1)
Joined: Jul 2006
Posts: 3,779
Likes: 6
From: NC
any from 01+ should work IIRC
 
Reply
Old Jul 28, 2011
  #4  
anger11''s Avatar
Thread Starter
|
Member
Joined: Jul 2011
Posts: 12
Likes: 0
From: newfoundland
Awesome bys, thats what ill go for.....thanks for the imput!
 
Reply
Old Jul 28, 2011
  #5  
theelcaminoman's Avatar
Joined: May 2011
Posts: 514
Likes: 0
From: Olney, IL
Keep this thread updated w/ pics. I have a 2011 and I wanna know how hard itll be to do and what the before and after looks like. Also some opinions from you: difficulty and "cost to how good it looks" ratio lol
 
Reply
Old Jul 28, 2011
  #6  
anger11''s Avatar
Thread Starter
|
Member
Joined: Jul 2011
Posts: 12
Likes: 0
From: newfoundland
Haha...."cost to how good it looks ratio"...i like it..lol. Ya i'll keep this updated....I just ordered my 33 x 12.5 r15's BFG all terrains today. I'm going to order my rims and bl in the next week or so. For rims i'm going with a 15 x 10 and a 3.75 offset. Hopefully that will stick out far enough.
 
Reply
Old Jul 29, 2011
  #7  
theelcaminoman's Avatar
Joined: May 2011
Posts: 514
Likes: 0
From: Olney, IL
I wish I woulda ordered rims that fit my truck instead of just getting some lol. Iv got Shelby rms and they would fit nice but I had to run spacers so they stick past the fender
 
Reply
Old Aug 24, 2011
  #8  
Maxboost's Avatar
Member
Joined: Jul 2005
Posts: 899
Likes: 0
From: Mechanicsville, Maryland
Do the 10's have ten bed bolts like the 11's?
 
Reply
Old Aug 28, 2011
  #9  
anger11''s Avatar
Thread Starter
|
Member
Joined: Jul 2011
Posts: 12
Likes: 0
From: newfoundland
Im not sure how many bolts the 2010's have. My lift is at home which is a for a 2010. I would check to see how many bolts there are but im in Alberta working. Hopefully I can get a trip home soon to do the lift, then I'll let ya know.
 
Reply
Old Sep 15, 2011
  #10  
Maxboost's Avatar
Member
Joined: Jul 2005
Posts: 899
Likes: 0
From: Mechanicsville, Maryland
Thanks,
 
Reply
Old Sep 15, 2011
  #11  
ShadowRanger08's Avatar
Member
iTrader: (3)
Joined: Jan 2008
Posts: 1,694
Likes: 1
From: Ontario, Canada
the 09+ have 10 bed bolts
 
Reply
Old Sep 20, 2011
  #12  
06RangerXLT's Avatar
Member
iTrader: (2)
Joined: Feb 2011
Posts: 1,685
Likes: 6
From: Halton Hills, Ont
Originally Posted by anger11'
Haha...."cost to how good it looks ratio"...i like it..lol. Ya i'll keep this updated....I just ordered my 33 x 12.5 r15's BFG all terrains today. I'm going to order my rims and bl in the next week or so. For rims i'm going with a 15 x 10 and a 3.75 offset. Hopefully that will stick out far enough.
have a feeling your gonna rub.
 
Reply
Old Jan 5, 2012
  #13  
anger11''s Avatar
Thread Starter
|
Member
Joined: Jul 2011
Posts: 12
Likes: 0
From: newfoundland
Im hoping it wont rub. Im going to crank the torsion bars until the truck is leveled out. Any reason why u think i may rub?Past experience?lol
 
Reply
Old May 1, 2012
  #14  
anger11''s Avatar
Thread Starter
|
Member
Joined: Jul 2011
Posts: 12
Likes: 0
From: newfoundland
Well its been a while since I updated this, life has been busy(new house, job, little things like that..lol) But I have the Ranger lifted with tires and rims on. I was going to go with bfgs but I got screwed over by a company and I went with goodyear mtr tires...awesome offroad but not as quite as my brothers bfgs. Lift went in good but the shifter console dosent fit properly even with the 3in extension. Some trimming is required I guess. Here are some pics. I will try and get some nice pics. Next jobby is gears...4.56. and mabey a 15L cat motor.lol.
 
Attached Thumbnails 2011 ford ranger body lift-img-20120430-00087.jpg   2011 ford ranger body lift-img-20120430-00088.jpg   2011 ford ranger body lift-img-20120430-00089.jpg   2011 ford ranger body lift-img-20120430-00090.jpg   2011 ford ranger body lift-img-20120430-00091.jpg  

2011 ford ranger body lift-img-20120430-00092.jpg   2011 ford ranger body lift-img-20120430-00093.jpg  
Reply
Old May 1, 2012
  #15  
98liftedranger's Avatar
RF Veteran
iTrader: (5)
Joined: Aug 2008
Posts: 12,538
Likes: 4
From: California
Looks good! Just need to raise the hitch.
 
Reply
Old May 1, 2012
  #16  
06FordFX4's Avatar
Member
iTrader: (1)
Joined: Feb 2012
Posts: 694
Likes: 2
From: Canada
they still make the old MT/R's ?
raise the hitch and good to go! doesnt seem like 3" lift to me, but thats probably because 08+ were lower from factory.
 
Reply
Old May 2, 2012
  #17  
anger11''s Avatar
Thread Starter
|
Member
Joined: Jul 2011
Posts: 12
Likes: 0
From: newfoundland
no they dont make the old mtr tires anymore. some guy had them and never used them so I bought em. Its a 3in lift and I even cranked the torsion bars alittle. The 08+ rangers are like 2in lower. Gotta get that hitch done too, my brother is a welder so Ill just sit back and watch the pro.lol.
 
Reply
Old May 2, 2012
  #18  
Ranger_Guy15's Avatar
Member
Joined: Apr 2007
Posts: 2,827
Likes: 3
From: MN
Looks good. DSG with black wheels ftw!
 
Reply
Old May 5, 2012
  #19  
anger11''s Avatar
Thread Starter
|
Member
Joined: Jul 2011
Posts: 12
Likes: 0
From: newfoundland
Thanks.
 
Reply
Old May 5, 2012
  #20  
FULLSCALE's Avatar
Level III Supporter
iTrader: (12)
Joined: Mar 2009
Posts: 8,184
Likes: 4
From: Clinton, Ontario
Good looking truck!
 
Reply
Old May 5, 2012
  #21  
anger11''s Avatar
Thread Starter
|
Member
Joined: Jul 2011
Posts: 12
Likes: 0
From: newfoundland
Thanks. Love the look of your truck as well. Good Job!
 
Reply
Old May 5, 2012
  #22  
anger11''s Avatar
Thread Starter
|
Member
Joined: Jul 2011
Posts: 12
Likes: 0
From: newfoundland
Here are some more pictures. Stupid Newfoundland weather sucks. We got good beer and pretty women but the weather sure is garbage. Cant get a deacent day to go wheelin' and take some nice pics. Anywho..I already have close to 1500kms on the truck(I dont stop..lol) and everything is working great. Even with the 3.73's my mileage is not any worse. The only thing I find is 1st gear is too fast for wheelin'... almost needed to shift to 4wd low just to slow her down a bit. Im plannin on either 4:10s or 4:56 gears. Anybody with opinions? I do a fair bit of highway driving and I sometimes tow a 17ft enclosed trailer.
 
Attached Thumbnails 2011 ford ranger body lift-0505021741.jpg   2011 ford ranger body lift-0505021742.jpg   2011 ford ranger body lift-0505021742a.jpg   2011 ford ranger body lift-0505021742b.jpg  
Reply
Old May 6, 2012
  #23  
jeffboulard's Avatar
Member
Joined: Jul 2010
Posts: 53
Likes: 0
From: ontario
I am running A 2008 sport 4X4 with 33's and 4.10's. I tow a decent amount and do some wheeling. My gear choice fits my needs perfectly. I had 35's with 4.10's and couldn't tow what i wanted to.

You should do the pre-key mod or after market keys and just be easy on how far you crank them. The factory keys that came with your and my truck suck lol. Oh and aal for the back.
 
Reply
Old May 6, 2012
  #24  
4wdJunkie's Avatar
Member
Joined: Mar 2012
Posts: 15
Likes: 0
From: Miami, FL
Icon7

Originally Posted by anger11'
Hey guys im new to this fourm, alot of great information on here. Back in jan I bought a 2011 Ranger sport 4x4 with the manual trans. Im looking for a 3in body lift but all I can find is 2010's. Just wondering if a 2010 bl will fit a 2011? any info would be a great help. thanks
Every time I have problems with mine, I always go to this site. Their product is reasonable at the same time they have a good costumer service. I can always ask them what I need and also if they don't it, they can refer me to a site who has it. It might worth a try.
http://www.onsaletruckparts.com/
 
Reply
Old May 7, 2012
  #25  
Mcleary316's Avatar
Member

Joined: May 2010
Posts: 2,322
Likes: 2
From: Lawrence, Kansas
Sharp truck! LOVE those tires.
 
Reply



All times are GMT -6. The time now is 05:32 PM.