Busted radiator drain plug, now what?
#1
Busted radiator drain plug, now what?
I did a radiator flush today, with the kit flushed it out with the hose and everything. filled and emptied 3 times to make sure its all clean. After the last rinse, I tightened the drain plug to fill up with antifreeze, the final step and I tightened it too tight and the end snapped right off. I had no idea it was plastic I thought it was metal. I did this at night with my outdoor lights (mounted on the house) and a flashlight.
So heres what came off
Its not leaking, I took it for a 10 mile drive and reved the **** out of the engine, its not leaking, I think I will be alright since the shaft of the bolt is in there. Right? I dont know how i would get it out if I had to, but I wont need another flush for another 100,000 miles. Do you think it will last till then?
So heres what came off
Its not leaking, I took it for a 10 mile drive and reved the **** out of the engine, its not leaking, I think I will be alright since the shaft of the bolt is in there. Right? I dont know how i would get it out if I had to, but I wont need another flush for another 100,000 miles. Do you think it will last till then?
#2
Who knows, but if it comes down to it, take the radiator out, and drill the plug out as much as you can. Since its plastic, it should be rather easy to get out, but who knows. There are also some tools (cant think of what they are called) that would help you out. They have backwards threads, and as you screw them in, it actually turns the threads out.
#6
#7
#9
alright awesome thanks for the info! I was worried it might pop out on my trip to OBX!
I dont see how it will be easy to remove but I will pick up that part and give it a try.
Also, just curious, the manual says refill capacity is 13L, I flushed it with the hose (and the kit), drained it, filled it with the radiator cleaner and water, ran it for a while, flushed it again, and refilled it but it only took the two 3.78L jugs of antifreeze, so about 7.6L and it was full, I didnt get to put any water in. Wtf?
I dont see how it will be easy to remove but I will pick up that part and give it a try.
Also, just curious, the manual says refill capacity is 13L, I flushed it with the hose (and the kit), drained it, filled it with the radiator cleaner and water, ran it for a while, flushed it again, and refilled it but it only took the two 3.78L jugs of antifreeze, so about 7.6L and it was full, I didnt get to put any water in. Wtf?
#10
Last year I changed the anti-freeze in my Lightning and that palstic part just broke right off when I was tightening it up - and it wasn't tight either. But I noticed on mine that the remaining part of the valve still in radiator had the shape of an allen wrench on the inside - and sure enough, I took the valve out with an allen wrench and replaced it with a new one.
#11
Member
iTrader: (2)
Join Date: May 2009
Location: centralcity, KY
Posts: 771
Likes: 0
Received 0 Likes
on
0 Posts
Some people run straight antifreeze some mix 50/50, just don't run straight water,LOL Oh by the way if you don't have a warranty or whatever to get it fixed, you might be able to try and use a small drill bit and drill it out and then use a tape that makes threads to the left, and as you tighten it would bring out the plastic peice. I don't know though never tried it, but will if it ever happens. it was just a thought tho.
#13
Some people run straight antifreeze some mix 50/50, just don't run straight water,LOL Oh by the way if you don't have a warranty or whatever to get it fixed, you might be able to try and use a small drill bit and drill it out and then use a tape that makes threads to the left, and as you tighten it would bring out the plastic peice. I don't know though never tried it, but will if it ever happens. it was just a thought tho.
#15
Last year I changed the anti-freeze in my Lightning and that palstic part just broke right off when I was tightening it up - and it wasn't tight either. But I noticed on mine that the remaining part of the valve still in radiator had the shape of an allen wrench on the inside - and sure enough, I took the valve out with an allen wrench and replaced it with a new one.
Thread
Thread Starter
Forum
Replies
Last Post
Dan T 4L
4.0L OHV & SOHC V6 Tech
11
11-11-2021 02:55 AM
sheltonfilms
General Ford Ranger Discussion
11
01-11-2011 09:11 AM
DownSouthTAS
General Ford Ranger Discussion
7
12-08-2007 02:04 PM