4.0L OHV & SOHC V6 Tech General discussion of 4.0L OHV and SOHC V6 Ford Ranger engines.

98' 4.0 wont fire

Thread Tools
 
Search this Thread
 
  #1  
Old 06-10-2010
redman89's Avatar
Member
Thread Starter
Join Date: Mar 2010
Location: winona,mn
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
98' 4.0 wont fire

I have a 1998 ranger with the 4.0 in it. Truck ran and drove fine, parked it the other day, then the next day it would not start. Seems to turn over fast enough, so i'm assuming its a fuel problem.
What kind of simple things can a guy who does not know a lot about mechanics check out to try and diagnose the problem? My friend told me to have someone turn the key and see if i can hear the fuel pump turn on for starters. The truck usually started decent, but sometimes took a few extra cranks to fire, so he said the fuel pump may have been going out and now finally decided to quit.
Any fuses or anything else I could check?
 
  #2  
Old 06-10-2010
redman89's Avatar
Member
Thread Starter
Join Date: Mar 2010
Location: winona,mn
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
So the truck hasn't started for two days, my friend tells me to go bang on the gas tank with a rubber mallet. It fires right up after doing that. So is my fuel pump probably going bad and whacking the tank just jolted it or something? Think its safe to drive around?
 
  #3  
Old 07-19-2010
ccosgrove71's Avatar
Member
Join Date: Jun 2010
Location: richmond,va
Posts: 185
Likes: 0
Received 0 Likes on 0 Posts
the pump is going bad, you driving around on a ticking time bomb, there gonna be a day where its gonna leave you stranded.
 
  #4  
Old 07-23-2010
redman89's Avatar
Member
Thread Starter
Join Date: Mar 2010
Location: winona,mn
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
its still running fine, besides the fact that I now am buring/leaking coolant and have a cylinder misfire. Could there just have been some junk caught up in the fuel tank or a hose?
 
  #5  
Old 07-27-2010
Alex98's Avatar
Member
Join Date: Jul 2007
Location: Baltimore, Maryland
Posts: 949
Likes: 0
Received 1 Like on 1 Post
yeah i would park it until you cant that fixed and check plugs and wires, stuff like that as well.
 
  #6  
Old 07-31-2010
ElleShooTiger's Avatar
Member
Join Date: Dec 2009
Location: Houston, TX
Posts: 32
Likes: 0
Received 1 Like on 1 Post
We bought our 98 4.0 last year and the next day, it would crank but not fire. Wound up checking everything! In the end, it was either a not-really-dirty battery terminal, or me wiggling the connector for the crank position sensor. Fired up and has run fine since!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
nrthbnd06
SOHC - 2.3L & 2.5L Lima Engines
0
09-09-2012 02:06 PM
dantheman
General Technical & Electrical
4
08-26-2010 06:33 PM
chillmiller
2.9L & 3.0L V6 Tech
25
09-23-2009 08:31 AM
WholesaleMN.com
General Ford Ranger Discussion
14
12-22-2004 05:29 PM



Quick Reply: 98' 4.0 wont fire



All times are GMT -6. The time now is 08:24 PM.