3.0 Fan won't come off!!!!
#1
3.0 Fan won't come off!!!!
Ok, I've got my Junes efan, and I WANT IT ON MY TRUCK! one small problem.... my stock fan won't come off.... I've twisted and beat and baned and it won't loosen to save it's life...
I put an adjustable wrench on it, and he wrench SLIPPED on the "nut" thing behind the fan blades. It was slipping, and sortof rounding off the metal he nut thing was made of....
What do i do? you guys have never steered me wrong yet... so please help me so I can install my efan please!!
Thanks!!
I put an adjustable wrench on it, and he wrench SLIPPED on the "nut" thing behind the fan blades. It was slipping, and sortof rounding off the metal he nut thing was made of....
What do i do? you guys have never steered me wrong yet... so please help me so I can install my efan please!!
Thanks!!
#6
#7
nah, i didnt get the clutch wrench thing... i found an easier way (for me) I removed the belt, and put some of those chain vise grips ont he fan pulley. they wont let it move...
then i put the wrench on it WITH A PIPE and it rounded off the nut thing..... i'll soak it with pb blaster when i get home
then i put the wrench on it WITH A PIPE and it rounded off the nut thing..... i'll soak it with pb blaster when i get home
#12
#13
#16
Unregistered User
Posts: n/a
Originally Posted by mustanger1986
Air hammer long chisel
this is ok if your replacing the waterpump, if you do it this way you will need a waterpump, DUH!
go to murrays/autozone and rent the RIGHT tools to remove the fan clutch
heres one of matco's versions
heres the snap-on version, this is part of the set i have.
good luck
Thread
Thread Starter
Forum
Replies
Last Post
fletcher969
2.9L & 3.0L V6 Tech
4
01-14-2013 05:26 PM