Right rear axle shaft
#1
#2
e-z as pie
Put the truck on jack stands and pull the tire and drum off the side with the bent shaft.
Pull the diff cover and drain the gear oil.
Pull the cross Pin retaining bolt.
Push the cross pin out or if its a factory notched cross pin rotate it with the notch facing the bad axle shaft.
Push the axle shaft toward the differental.
Push the C-clip off the end of the axle shaft.
Pull the Axle shaft out.
Reverse with new Shaft.
Put the truck on jack stands and pull the tire and drum off the side with the bent shaft.
Pull the diff cover and drain the gear oil.
Pull the cross Pin retaining bolt.
Push the cross pin out or if its a factory notched cross pin rotate it with the notch facing the bad axle shaft.
Push the axle shaft toward the differental.
Push the C-clip off the end of the axle shaft.
Pull the Axle shaft out.
Reverse with new Shaft.
#4
F Y I :
===============================
Be VERY CAREFUL not to round-off the head of the crosspin bolt, use a 5/16ths, 6 point boxend wrench or socket & pop it with a mallet, as it has loctite on the threads from the factory.
Be VERY CAREFUL not to round-off the head of the crosspin bolt, use a 5/16ths, 6 point boxend wrench or socket & pop it with a mallet, as it has loctite on the threads from the factory.
Last edited by 94Ranger355; 02-23-2011 at 09:02 PM. Reason: size
Thread
Thread Starter
Forum
Replies
Last Post
GreaseMonkey01
Drivetrain Tech
20
08-27-2012 11:04 AM
Protowrxs
OLD - Engine & Drivetrain
0
10-25-2011 03:27 PM
FRXLT
Drivetrain Tech
4
12-04-2008 06:04 PM