Four 100w off roaders
#1
Four 100w off roaders
Mounted some lights up using info I found here on Ranger forums.
I used square tubing.
[IMG][/IMG]
Repainted ultra flat black. Painted the bar and brackets too.
[IMG][/IMG]
Mounted on the bar.
[IMG][/IMG]
Crappy cell pic in the dark. They are on and wired.[IMG][/IMG]
And done.
[IMG][/IMG]
Yes they are the cheapo Harbor Freight.
Yes I used relays.
For the money, they work great.
I used square tubing.
[IMG][/IMG]
Repainted ultra flat black. Painted the bar and brackets too.
[IMG][/IMG]
Mounted on the bar.
[IMG][/IMG]
Crappy cell pic in the dark. They are on and wired.[IMG][/IMG]
And done.
[IMG][/IMG]
Yes they are the cheapo Harbor Freight.
Yes I used relays.
For the money, they work great.
#3
#11
Thanks everyone. I thought I would catch hell for using Harbor Freight lights. I will get a couple more pics now that its daylight again.
Those are the ones. The in store price was less.
On every pic I have seen the angle iron was used. I wanted to be different. The square tubing puts the lights just a bit higher. Also there are 1/4" spacers between the brackets and the bar.
On every pic I have seen the angle iron was used. I wanted to be different. The square tubing puts the lights just a bit higher. Also there are 1/4" spacers between the brackets and the bar.
#13
Some more pics of my Harbor Freight off road lights. I will add loom to the wires soon.
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
I did not like the switches that came with the sets, so I went to Vatozone and picked out one I liked.
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
I did not like the switches that came with the sets, so I went to Vatozone and picked out one I liked.
[IMG][/IMG]
Last edited by nicky919; 01-23-2011 at 02:00 PM.
#14
I love the light bar you made! However I'm partial to the beefyy look of the brush guard. I think I'm going to get the back rack and a brush guard. Two lights on the guard and 4 on the back. But how did you run your wires threw the firewall? Is there a pre existing hole or did you run them threw the door jam? And also how did you run the wires threw to the lights on the bar on the back?
#16
Thread
Thread Starter
Forum
Replies
Last Post
Goodysgotacuda
Interior, Exterior, & Electrical
3
03-21-2014 06:10 PM
Lefty04LevelII
Wheels & Tires Semi-Tech
21
08-01-2009 02:40 AM
Goodysgotacuda
New Ideas
22
03-30-2009 07:10 PM