Mod: Fold-A-Cover
Difficulty: 2/10
Time: ~4 Hours

Author: George Novak (SilverTank)
http://silvertank.batcave.net/index.htm
Please direct all questions and comments to the author.


This How-To will cover the installation of a Fold-a-Cover LS. It took myself and my brother-in-law about 4 hours to install the cover. Most of the time was spent learning to use a rivet gun (DOH). I'm very happy with the cover, best $500 I ever spent. For more info, visit fold-a-cover. I purchased the cover from Beto's Customs in Tampa 813-961-7571


IMPORTANT!
Be sure to always wear proper eye protection while working with power tools.

Tools/Equipment needed:

• Drill
• Screw Drivers
• Rivet Gun

Step 1:

Install starts by attaching rail to existing Ranger bed cap. Uses tape and existing screws.


Step 2:

Locks are secured to bedliner using rivets.


Step 3:

Cover locks are drilled into the bedliner. There is also a no drill clamp-on system available.


Step 4:

Finished install shows main fold point secured to truck. These screws must be removed to fully remove the cover.



Mod Complete:



Finished job, cover closed and locked.


The Fold-a-Cover LS in action.


Back open to show tailgate lock on cover. The tailgate won't open with the cover closed.


Butt shot with cover closed.




Edited by Jason Gonderman (rngprerunner) for grammar and format.