how about the fuel line? do i need to remove that? it doesn't seem to want to move

 

alright i have everything extended and loose but the dang on front two bolts will not come out! someone give me some kind of info to get these things outs please

 

nothings working guys need some help here

 

bumpo trying to get it done right now need some info

 

??

 

Pipe wrench to hold the bushing and impact. Mine were rusted solid to the bushings, I had to grind the heads off.

 

what do you mean grind the heads off?

 

can anyone help me?

 

this is frustrating!

 

Heat gun worked just fine!

 

wtf these damn things will not come out! and every time i get the pipe wrench on it just pops right off

 

I had trouble on those too and I was working by myself. I found channel locks will not stay on and it is hard to heat them. I ended up using vise grips on the small outer lip and when I turned the bolt the vise grips would jam between the body and not move. This would hold that sleeve from turning and the bolts eventually came out, but it was not easy. I had to keep re-clamping the vise grips, but it worked.

 

im about to just cut the damn bolt off where is the part threaded?

 

Ya i used vise grips and clamped them to the round metal part, if you, or someone posts a picture Ill show you exactly where I clamped them, and they would lock up against the frame

 

gotthis from stones post has everythin thats on the stock one

 

lift the body up and heat right down in that hole in the center of that top washer..

then lower down the body and impact out OOORRR hold with something..

 

got her dun today! thanks everyone for the help i didn't raise the bumpers yet cause my time has been limited but got it up and hard parts dunn!

 

Congrats Man!

 

add another double lifted ranger to the site fellers

 

 

well like i said the bumpers aren't raised but i'll get them on sometime tomorrow lol

 

haha im just bustin your *****

 

well i really do appreciate all the help from you guys so i'll get you pics tomorrow next to my brothers s10 and dads expedition

 

no prob. good to hear you got it done. s10 ftl haha

 

new pics in the photo section