Headlight switch bulb replacement
#1
Headlight switch bulb replacement
Could someone let me know what exactly the bulb needed for replacement is? If possible I'd like to get a blue one if not I can work something out with painting the backs of the sections on the switch.
I already have it out im just unsure of the replacement bulb necessary.
Oh and if anyones got links with decent prices post em up as well.
Andrew
I already have it out im just unsure of the replacement bulb necessary.
Oh and if anyones got links with decent prices post em up as well.
Andrew
#6
Could someone let me know what exactly the bulb needed for replacement is? If possible I'd like to get a blue one if not I can work something out with painting the backs of the sections on the switch.
I already have it out im just unsure of the replacement bulb necessary.
Oh and if anyones got links with decent prices post em up as well.
Andrew
I already have it out im just unsure of the replacement bulb necessary.
Oh and if anyones got links with decent prices post em up as well.
Andrew
#8
grab a couple if you can, the ones I used didn't last all that long cuz they were on from the time you turned the ignition on until you turned it off, in other words, all the time. Now whether this has changed on the newer models or not i do not know. Just a little heads up for ya.
#12
#13
I thought they were not replaceble. Do you have any pics of this said bulb and plastic holder. I was under the impression that a new bulb would need to be soldered in.
#14
Well I have replaced all of the ones in my cluster along with the ones in the headlight switch and the 4x4 switch. If I ever remove my cluster again, I will get you some pictures.
#15
#16
#18
I know this is an old thread but I was poking around online and found these: Product Listing - CAR
They say they replace 2721 bulbs. I may order one and see how they do.
They say they replace 2721 bulbs. I may order one and see how they do.
#19
Are you sure it's a 3/4 led?
Found this on super bright leds. Probably going to replace mine that's burned out.
NeoWedge series LED Lamp
T1-1/4 NeoWedge base LED bulb for indication lamp applications. Lamps consists of non-removable standard LED or High Power SMD LED. 3mm LED in NEO3 lamp; 4mm LED in NEO4 lamp; 5mm LED in NEO5 lamp. 12 Volt DC. 100/120 degree beam pattern
http://www.superbrightleds.com/cgi-b...nstrument.html
They have 3 sizes, 3mm, 4, and 5mm.
Thanks,
-Nigel
Thread
Thread Starter
Forum
Replies
Last Post
sullys_ranger
Interior Semi-Tech
12
09-29-2010 03:30 PM
btm757
General Technical & Electrical
18
02-07-2010 04:41 PM
ac0413
General Technical & Electrical
2
03-02-2009 08:31 PM
ac0413
General Ford Ranger Discussion
24
03-02-2009 06:01 PM