General Ford Ranger Discussion General discussion of the Ford Ranger that does not fit in any other sub-forum.
Sponsored by:
Sponsored by: DashLynx

Squealy Noise Update!!!

Thread Tools
 
Search this Thread
 
  #1  
Old 09-30-2008
yellow_edge's Avatar
Member
Thread Starter
Join Date: May 2008
Location: Wauseon,Ohio
Posts: 760
Likes: 0
Received 0 Likes on 0 Posts
Squealy Noise Update!!!

k remember i posted about that nosie i had no clue what it was...but since then i put a new tensioner pulley in and that didnt do anyhting. so i was still convinced its the belt and yesterday it actually started making that nosie at IDLE! i was pissed. so out of anger i sprayed some all purpose pb blaster and it STOPPED! so there you go, it has to be the belt now right??? it still made that noise when driving but not till 3000 rpms as it was 2500 before. NOW anyone have suggestions???
oh and one of my friends suggested spraying windex on it instead, wat u think bout that?? i dont really want the belt to jump off lol
 
  #2  
Old 09-30-2008
schatten789's Avatar
Member
Join Date: Feb 2007
Location: Matagorda County, Texas
Posts: 735
Likes: 0
Received 0 Likes on 0 Posts
The belt shouldn't jump off if its put on right. May dads truck has the same problem and has been doing it for over a year really bad. I was looking at it the other day and I found that the water pump pulley is ever so slightly wobbling and the noise kinda sounds like it coming from that area so that has to be it. I talked to a mechanic a wile back about it and he said that I should check for a pulley out of alignment, it wasnt out of alignment but it wobbled.
 
  #3  
Old 09-30-2008
0RangerEdge2's Avatar
Member
iTrader: (2)
Join Date: Jun 2005
Location: Ohio
Posts: 2,592
Likes: 0
Received 0 Likes on 0 Posts
Phil, you know I know a lot. Why don't you come over and we can figure it out? I'm guessing the belt is just glazed over and when it slips it starts squeaking.

When it was idling was the a/c compressor on as well as your stereo up loud? Because that puts a big load on the belt and it can slip a little. I'm also willing to bet that the idler pulley needs a cleaning or replacing. (Not sure if the 4.0 has that) Either way, a goodyear gatorback belt usually solves belt squeaking.
 
  #4  
Old 10-03-2008
97ranger xlt's Avatar
Member
Join Date: Feb 2007
Location: PSL, FL
Posts: 515
Received 9 Likes on 7 Posts
  #5  
Old 10-04-2008
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
Join Date: May 2005
Location: Boring, Oregon
Posts: 21,721
Likes: 0
Received 10 Likes on 10 Posts
Are you sure it's coming from the serpentine system??

Check that idler pulley...the one connected to nothing.....it's just sorta chillin' there. Those goes out as well.


How old is the belt? I vote stretched belt, or wrong belt put on if you recently replace it. Throw on a Goodyear Gatorback...mine stock 35k belt would squeek at startup and sometimes at idle and while driving....replaced it, put 50k on it with no squeeks. Then the tensioner pulley seized and distroyed it. replaced and now have about 20k on the new gatorback.
 
  #6  
Old 10-04-2008
FullThrottle02's Avatar
Member
iTrader: (3)
Join Date: Apr 2008
Location: McHenry,IL
Posts: 586
Likes: 0
Received 0 Likes on 0 Posts
If the squeal goes away when you spray something on it. It is the belt that is the problem.
Like Shane said get a Goodyear Gatorback. They are the best belt I have used.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
blair683
4.0L OHV & SOHC V6 Tech
4
07-09-2015 08:40 PM
Jeremy102579
Drivetrain Tech
3
03-22-2009 03:48 PM
yellow_edge
General Ford Ranger Discussion
7
05-26-2008 01:44 PM
heaton84
General Technical & Electrical
8
11-18-2007 10:52 AM
dodge_cowboy
1" & 3" Body Lifts
36
07-17-2006 02:01 PM



Quick Reply: Squealy Noise Update!!!



All times are GMT -6. The time now is 07:20 AM.