Power Steering Fluid Flush Problem
#1
Power Steering Fluid Flush Problem
I'm the third owner and to my knowledge, the only one who has given it any decent maintenance. So it's safe to assume my power steering fluid hasn't been replaced since the day it rolled off the line.
I jumped through all the hoops yet.
Just to be clear, here's the steps I took:
Put it on jack stands
Unplugged the return hose
Rotated the steering wheel until the fluid was gone
Added fluid until it drained clean substance.
Plugged the return hose back in
Rotated the steering wheel again and added fluid as need
Yet when I cranked the engine, the fluid went from clear to cloudy.
Any idea what may be wrong?
It's a '95 2.3 manual
I jumped through all the hoops yet.
Just to be clear, here's the steps I took:
Put it on jack stands
Unplugged the return hose
Rotated the steering wheel until the fluid was gone
Added fluid until it drained clean substance.
Plugged the return hose back in
Rotated the steering wheel again and added fluid as need
Yet when I cranked the engine, the fluid went from clear to cloudy.
Any idea what may be wrong?
It's a '95 2.3 manual
Thread
Thread Starter
Forum
Replies
Last Post
oxchampion
4.0L OHV & SOHC V6 Tech
10
11-15-2013 12:05 PM
greensystemsgo
General Ford Ranger Discussion
3
07-16-2010 09:13 PM