I need the electical guys help again!!!!
#1
I need the electical guys help again!!!!
well i got my fog lights mounted and everything, but i can only turn them on when the headlights are on. I cant even turn them on with just the side markers on. I know im my probe i ran a constant 12v to a wire and i could turn them on no matter what as long as my key was on. I want to be able to run my fogs with just the key on and hitting the switch. i know i had to cut a wire on the probe i just dont know what one to cut and run the 12v too. i cant find the wiring diagram in my haynes manual so any help would be great.
Thanks
Cam
Thanks
Cam
#6
#7
#9
Member
iTrader: (2)
Join Date: May 2008
Location: Tucson , Arizona
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Check your underhood fuse box. I have my fogs hooked up there, without a relay (I don't have a fog light switch). There is a slot that gets power when the parking lights are lit. I can't remember off the top of my head, but a relay for the fog switch is supposed to be there. Play around with a volt meter. I wouldn't splice into the parking lights because that would be too much load on that single wire IMO.
Thread
Thread Starter
Forum
Replies
Last Post