How Do I Wire my Alarms keyless entry?
#1
How Do I Wire my Alarms keyless entry?
Im in the process of wiring in my alarm I got today, I cant figgure out how the power locks work on rangers. What do I tie the alarm wires into to get the truck to unlock/lock with the new fob's? where are the wires located as well?
(page 44 on the link)
Also where and what colour is the door trigger imput, its the wire that goes from the door that turns on the dome light. (page 35 on the install instructions, follow link)
Wire colours please!
Here's the link for Installation Instructions
http://www.omegaguvenlik.com/english...k9-mundial.pdf
(page 44 on the link)
Also where and what colour is the door trigger imput, its the wire that goes from the door that turns on the dome light. (page 35 on the install instructions, follow link)
Wire colours please!
Here's the link for Installation Instructions
http://www.omegaguvenlik.com/english...k9-mundial.pdf
#4
#6
#7
#9
Yeah I had to drive my truck to work today with the kicker pannel off and the mettal under it off with a bunch of wires dangling, half an alarm harness wired in and the hood opener hanging low! it was kinda greasy.
#11
I want to get it in front of the Rad but behind the Grill there, where I originally mounted it, somehow it grounded out and was shorting out so I still need to mount it.
Let me know how you wired everything in ( like the power locks, and the door triggers)
Let me know how you wired everything in ( like the power locks, and the door triggers)
#12
Thread
Thread Starter
Forum
Replies
Last Post
ranger024x4
General Technical & Electrical
10
06-09-2005 07:31 PM
ZetaOmegaRanger
General Technical & Electrical
2
08-08-2004 12:30 AM