Back light Gauge bulbs , Part number ?
#1
Back light Gauge bulbs , Part number ?
well my whole right side of my gauge cluster finally died , my question is where canI buy the replacement bulbs and what are there part number ?
Posibly finding them in differant colors an option ? or should I buy plain and paint them ?
Sorry in advance , I know this has been braught up but I searched and couldnt find what I was looking for ...
Thanks again
Nick
Posibly finding them in differant colors an option ? or should I buy plain and paint them ?
Sorry in advance , I know this has been braught up but I searched and couldnt find what I was looking for ...
Thanks again
Nick
#2
Your instrument cluster takes 194 bulbs. Takes 6 (i believe)....replace them all. There's another thread going on on how-to replace the bulbs....gotta pull the cluster out. Avalible at any autoparts store, heck chevron gas stations might have them too.
Once again, I suggest replacing every light bulb. I also suggest getting 194LL's. Long Lasting.
you can get different colors. You can get LEDS and mod the cluster. N3elz has a good how-to page on this mod.
Once again, I suggest replacing every light bulb. I also suggest getting 194LL's. Long Lasting.
you can get different colors. You can get LEDS and mod the cluster. N3elz has a good how-to page on this mod.
#3
Found that link:
http://www.cardomain.com/ride/296394/24
That's a how-to to change the color....or to make the film clear, and put in colored bulbs or colored LEDs. John is a member here, He's N3elz. I have performed just about every mod on his cardomain.
http://www.cardomain.com/ride/296394/24
That's a how-to to change the color....or to make the film clear, and put in colored bulbs or colored LEDs. John is a member here, He's N3elz. I have performed just about every mod on his cardomain.
#5
The mod i posted about is very easy....but very time consuming. I started to do it, then stopped. I'm to impatient. My buddy did do it in his '01 Ranger....i'll see if i can find the rps post.
EDIT:
http://www.rangerpowersports.com/for...d.php?t=219564
The pics don't do justice at all.....the pics are bad compaired to real life. It's more evenly distributed. He did kinda overkill imo on the amount of leds. You could put long life bulbs in and just paint the overlay deals red....or sand/scrape down the green or blue depending on year, and run red bulbs.
EDIT:
http://www.rangerpowersports.com/for...d.php?t=219564
The pics don't do justice at all.....the pics are bad compaired to real life. It's more evenly distributed. He did kinda overkill imo on the amount of leds. You could put long life bulbs in and just paint the overlay deals red....or sand/scrape down the green or blue depending on year, and run red bulbs.
Last edited by Fx4wannabe01; 12-28-2007 at 11:22 PM.
Thread
Thread Starter
Forum
Replies
Last Post
GI_JO_NATHAN
OLD - Interior, Exterior, Electrical, & Misc.
3
08-27-2010 11:01 PM
demiseranger
OLD - Interior, Exterior, Electrical, & Misc.
6
01-05-2010 11:22 PM
edgeman4.0
General Technical & Electrical
11
01-05-2009 09:48 AM