Originally Posted by Scrambler82
The Explorer Seats MAYBE a little too big for the ’94 Cab…
Double check the fit before starting the project.
Something to thing about… if you happen to find two Rangers with 60/40 Seats, the Passenger side seats are the same as standard buckets.
Also, the tracks that bolt under the seats (my 03 anyway) have all of the controls, depending on which side they will be mounted on not the seats so the passenger seat can be used for a drivers side bucket. Two passenger seats from 60/40 equals two bucket seat set.
this will only work on 98+ seats. IT WILL NOT WORK FOR 97 AND OLDER.
97 and older backs mount with two bolts on the outside, and one on the inside. if you wanted to use a passenger bottom on the driver side, you would have to cut and weld the inside mounting point.
94 2.3, find some buckets/60/40 from the same style/year ranger cab you have. the outside two will bolt in, then you'll have to drill the inside two for each seat.