Back seasts removed
#1
#4
Member
iTrader: (3)
Join Date: Apr 2008
Location: McHenry,IL
Posts: 586
Likes: 0
Received 0 Likes
on
0 Posts
I would post pics, but there isn't much to see because I built a big storage box that covers most off the open areas up. I also have sound deadener so that covers the cab floor. If you want a pic I'll post one but it is hard to see and I don't want to pull the box out because it is very heavy.Oh yea, I left the jack and cover there because I don't have anywhere else to put it and might need it. I don't think it looks that bad. I would be nice to cover the holes where there is no carpet, but I don't mind it gave me a lot of space I needed.
Jason
Jason
#6
I have no pics....but.....the vinyl floor cuts off under the seats and jack spot. so there's exposed dwb. The pack panel is ugly as snot...all molded and crap for the jack.
I plan on replacing that back panel and making a 2dr back panel for for my 4dr. I think it can easily be done. Then follow that up with one of those 2dr tonneau cover things in the cab. Either that idea, or make a box like 084x4XLT(Keith) made....nicely fitting sub box to cover where the seats used to be. Possibly keep the driver side seat installed while using the 2dr back panel and sub box. idk. still tossin' ideas.
I plan on replacing that back panel and making a 2dr back panel for for my 4dr. I think it can easily be done. Then follow that up with one of those 2dr tonneau cover things in the cab. Either that idea, or make a box like 084x4XLT(Keith) made....nicely fitting sub box to cover where the seats used to be. Possibly keep the driver side seat installed while using the 2dr back panel and sub box. idk. still tossin' ideas.
#15
I am also looking for pics with the front cup holder/console removed from the shifter on a manuel truck.
I was messing aroung with my cup holder console and broke the piece of plastic that sits under it that the 2 screws attach to. Its real loud and noisy so I was wondering what it looked like with it off.
If I was to take it off would I have to get a new shifter boot and how would I attach it?
I was messing aroung with my cup holder console and broke the piece of plastic that sits under it that the 2 screws attach to. Its real loud and noisy so I was wondering what it looked like with it off.
If I was to take it off would I have to get a new shifter boot and how would I attach it?
#16
Stone...i'll see if i have it as well. I got all that crap lying in a pile.
https://www.ranger-forums.com/forum2...ad.php?t=62606
Thread
Thread Starter
Forum
Replies
Last Post
05ranger
General Technical & Electrical
5
10-16-2006 12:30 PM
NoSparkPlugs
General Ford Ranger Discussion
11
06-13-2004 04:27 PM