Zabeards SAS Thread
#1051
Originally Posted by 04blackedge
Just out of curiosity why didn't you go ahead and use the D44 when you first did the SAS? Seems like it would have saved you time and money. Nonetheless, its gonna be even more badass when you get it done.
I was a newb, too many bracket decisions, angles, caster, spring style, track bar, etc, etc...
I was just lost did not have the fab skills and I could easily follow that white trucks design because I had somewhat of a price list.
Now I know much more and have waited to find the correct axle I want for my needs, now its a simple procedure, just cost some money.
#1064
Let the fun begin! I just ordered...
all from Ballistic Fabrication
7/8" -14 tpi Tube Adapter -Tube Inner & Outer Diameters: Size 4: 1.25 in ID - 1.5 in OD Thread Hand: Left Hand Thread
7/8" -14 tpi Tube Adapter - Tube Inner & Outer Diameters: Size 4: 1.25 in ID - 1.5 in OD Thread Hand: Right Hand Thread
7/8" -14 tpi Jam Nut - Thread Hand: Left Hand Thread
7/8" -14 tpi Jam Nut - Thread Hand: Right Hand Thread
303 SS Spacer 3/4 in
XM-12/14 7/8" w/ 3/4" ballCrMo rod end w/ kevlar liner - Thread Hand: Left Hand Thread
XM-12/14 7/8" w/ 3/4" ballCrMo rod end w/ kevlar liner - Thread Hand: Right Hand Thread
Panhard / Trackbar mount Separation (from center of tube): 7 inches - Axle tube diameter: 3.0''
Weld on Dana 60 caliper brackets
Steering Kit Chevy Tie Rod Ends 1.50" OD .25 Wall
2 D44 High steer arms with hardware - Kit Type: Full kit (two arms & hardware)
XJ - TJ Jeep combo bracket upgrade kit - Axle tube diameter: 2.75''
Axle link Mounting Width: 2.63'' with 9/16'' hole (stock)
all from Ballistic Fabrication
7/8" -14 tpi Tube Adapter -Tube Inner & Outer Diameters: Size 4: 1.25 in ID - 1.5 in OD Thread Hand: Left Hand Thread
7/8" -14 tpi Tube Adapter - Tube Inner & Outer Diameters: Size 4: 1.25 in ID - 1.5 in OD Thread Hand: Right Hand Thread
7/8" -14 tpi Jam Nut - Thread Hand: Left Hand Thread
7/8" -14 tpi Jam Nut - Thread Hand: Right Hand Thread
303 SS Spacer 3/4 in
XM-12/14 7/8" w/ 3/4" ballCrMo rod end w/ kevlar liner - Thread Hand: Left Hand Thread
XM-12/14 7/8" w/ 3/4" ballCrMo rod end w/ kevlar liner - Thread Hand: Right Hand Thread
Panhard / Trackbar mount Separation (from center of tube): 7 inches - Axle tube diameter: 3.0''
Weld on Dana 60 caliper brackets
Steering Kit Chevy Tie Rod Ends 1.50" OD .25 Wall
2 D44 High steer arms with hardware - Kit Type: Full kit (two arms & hardware)
XJ - TJ Jeep combo bracket upgrade kit - Axle tube diameter: 2.75''
Axle link Mounting Width: 2.63'' with 9/16'' hole (stock)
Last edited by zabeard; 01-29-2008 at 07:05 AM.
#1068