2004 Ford Ranger Edge - $7,000
#1
2004 Ford Ranger Edge - $7,000
Category: Clean Title
Status: Domestic
I have a 2004 Ford Ranger Edge for sale, in USA - South Carolina.
Mileage: 60000 miles
Engine Size: 4.0
Asking price is $7,000
I dont want any BS in this thread..something has come up and I think its time for me to let go. I have done most of the hard work.
2004 Ford Ranger Truggy
Font Dana 44 - 5.13s locked high steer **NEEDS SHAFTS**
Rear 60 -- has caliper brackets
front three link, rear 3 link (wishbone)
20 gallon fuel cell custom made bracket for stock sending unit
dovetailed 22" front and rear
Brazilian headlights
Warn winch
38.5x14.50r17 pitbull mad dawgs
17x9 beadlocks
I have drag link parts just not welded,pitmarn arm not installed
I have all truck panels just not installed (fenders, hood, bedsides)
2x14" travel FOXcoilovers
2x 16" travel FOX coilovers
1x 20' 1.625x.120 DOM
1x 20' 2"x.250 DOM
interior is painted all black
bucket seats
Eclipse CD player
Has both Driveshafts
Truck has been sitting for 1.5 years, fluids have been topped and turn over every 6 months to get the fluids turned.
I just have ran out of time, I work 60+ hours a week and travel every other week. I have no time..
I can deliver in the southeast for a small price. local pick up prefered..
PASS THIS LONG -- I will give a 250 bucks to the person who finds the buyer!
To get this running it needs an efan, battery and gas..
All stock engine parts come with, I have the stock flareside bed I will throw in,
Status: Domestic
I have a 2004 Ford Ranger Edge for sale, in USA - South Carolina.
Mileage: 60000 miles
Engine Size: 4.0
Asking price is $7,000
I dont want any BS in this thread..something has come up and I think its time for me to let go. I have done most of the hard work.
2004 Ford Ranger Truggy
Font Dana 44 - 5.13s locked high steer **NEEDS SHAFTS**
Rear 60 -- has caliper brackets
front three link, rear 3 link (wishbone)
20 gallon fuel cell custom made bracket for stock sending unit
dovetailed 22" front and rear
Brazilian headlights
Warn winch
38.5x14.50r17 pitbull mad dawgs
17x9 beadlocks
I have drag link parts just not welded,pitmarn arm not installed
I have all truck panels just not installed (fenders, hood, bedsides)
2x14" travel FOXcoilovers
2x 16" travel FOX coilovers
1x 20' 1.625x.120 DOM
1x 20' 2"x.250 DOM
interior is painted all black
bucket seats
Eclipse CD player
Has both Driveshafts
Truck has been sitting for 1.5 years, fluids have been topped and turn over every 6 months to get the fluids turned.
I just have ran out of time, I work 60+ hours a week and travel every other week. I have no time..
I can deliver in the southeast for a small price. local pick up prefered..
PASS THIS LONG -- I will give a 250 bucks to the person who finds the buyer!
To get this running it needs an efan, battery and gas..
All stock engine parts come with, I have the stock flareside bed I will throw in,
#9
I think thats what Its gunna be -- Imma start arranging stuff today..I gotta figure out my traveling schedule and all and we will get this beast out of my driveway! We will leave it as that :)
#12
if it doesnt sell between now and when I get it up there..
Money isnt the issue to get this done..its time..I have none I am working 12+ hr days 5-6 days a week..I am a welder for 60 hours a week the last thing I wanna do when i get home is weld some more and fab..so I dont work on it..
Money isnt the issue to get this done..its time..I have none I am working 12+ hr days 5-6 days a week..I am a welder for 60 hours a week the last thing I wanna do when i get home is weld some more and fab..so I dont work on it..
#13
LOL. I know what you mean buddy.
Where you working at?.
I've had a person or two interested from my Facebook post, but I'm not really sure if they are serious or not
Where you working at?.
I've had a person or two interested from my Facebook post, but I'm not really sure if they are serious or not
#14
I work for a German company that makes gangway passage systems for mass transits all over the world and we are just swamped on top of normal production. I have been building display racks for a trade show we are going to next week in New Orleans.
Tell them to add me on facebook -- Evan Livengood and we can talk..
Tell them to add me on facebook -- Evan Livengood and we can talk..
#15
I remember having drunken transit talk with you at SL. Lol.
It's good to see the transit industry busy. Our ridership is up after introducing a new fare structure.
That wasn't really relevant to the thread.
Sooooooo......bump.
It's good to see the transit industry busy. Our ridership is up after introducing a new fare structure.
That wasn't really relevant to the thread.
Sooooooo......bump.
#18
that sucks even, i would normally say gwls, but i hope you have terrible luck and have to take it to zach. but i can totally understand not wanting to do more fab work when thats 80% of your life.
#19
I don't remember and until you mentioned it I didn't remember that either.
However, I am still tied for first w/ 2.
#21
I had a handful of tire kickers and one local offer but it was a low ball, so I declined..
I am going to take it up to Zachs hes gunna finish it, and going to have it at the dunes meet next year, or at least that is the plan. I just need to find the time to get up to Indy with it. Ive been home 3 nights out of the past 2.5 weeks and I leave again for Pittsburgh on Tuesday.
I am going to take it up to Zachs hes gunna finish it, and going to have it at the dunes meet next year, or at least that is the plan. I just need to find the time to get up to Indy with it. Ive been home 3 nights out of the past 2.5 weeks and I leave again for Pittsburgh on Tuesday.
#22
I had a handful of tire kickers and one local offer but it was a low ball, so I declined..
I am going to take it up to Zachs hes gunna finish it, and going to have it at the dunes meet next year, or at least that is the plan. I just need to find the time to get up to Indy with it. Ive been home 3 nights out of the past 2.5 weeks and I leave again for Pittsburgh on Tuesday.
I am going to take it up to Zachs hes gunna finish it, and going to have it at the dunes meet next year, or at least that is the plan. I just need to find the time to get up to Indy with it. Ive been home 3 nights out of the past 2.5 weeks and I leave again for Pittsburgh on Tuesday.
#23
I had a handful of tire kickers and one local offer but it was a low ball, so I declined..
I am going to take it up to Zachs hes gunna finish it, and going to have it at the dunes meet next year, or at least that is the plan. I just need to find the time to get up to Indy with it. Ive been home 3 nights out of the past 2.5 weeks and I leave again for Pittsburgh on Tuesday.
I am going to take it up to Zachs hes gunna finish it, and going to have it at the dunes meet next year, or at least that is the plan. I just need to find the time to get up to Indy with it. Ive been home 3 nights out of the past 2.5 weeks and I leave again for Pittsburgh on Tuesday.
Thread
Thread Starter
Forum
Replies
Last Post
2004fx4level2
OLD - Ranger Based Vehicles
23
11-25-2013 09:15 PM
malydeen
OLD - Ranger Based Vehicles
2
07-09-2012 12:04 AM