Just a little teaser.......
#1
Just a little teaser.......
Here's a crappy cell phone pic, sorry it's all I got right now. This is all of the lift taken off minus the AAL. I like the way it rides right now and it'll be just the right height once I'm done with it. Let me know what ya'll think. I'm fabbing up the U bracket for the flip kit and going with squared U bolts so I can keep my trac bars on top to keep it somewhat like a 4-link.
#6
The rears are 18x9.5 tires: 275/45, and fronts are 18x8.5 tires: 245/45. As for feeling faster, yes. A LOT faster, ha ha. With the 33's it took me a while to get up to the 96mph limiter but now it hits the limiter and has enough acceleration to go up to about 105 before it starts to slow itself down to 96. And after replacing the freakin waterpump AGAIN, I'm taking the mechanical fan off and going e-fan. Then an SCT programmer . I'll have to get some better pictures once i get my camera back. Right now in the front it sits about 3" lower than an XL and about 1.5" higher in the rear (for right now).
#9
Well, it would have cost me another 350 to keep it as high as it was, and with being engaged planning a wedding and buying my fiance a new car and a blingin ring I didn't have the cash to buy myself new spindles............ SO all this cost me was my time, the rims and tires were a "Hey, come help me clean out my shop!" kind of thing and everything else I already had. And with me constantly "tinkering" I had to have it one extreme or the other. I put the stock spindles back on, put the stock shackles back on, took the blocks out and uncranked the t-bars and then took off the body lift.
Thread
Thread Starter
Forum
Replies
Last Post
Sonic04Edge
Snapshots
12
02-08-2010 09:39 AM