Spindle/Body Lift
#1
Spindle/Body Lift
Hey, sorry in advance, lots of questions, and i found a bunch of useful info when i searched the site, but i need some more. It seems the concensous on the site is that with a 2wd truck, go with spindles, not the expensive suspension lifts. I found some fabtech spindles at performancelifts.
http://performancelifts.com/cgi-bin/...TS98200-7.html
What should i do with the back? Blocks or Add-a-Leaf? The website shows options for an alignment kit and shocks, do i need those? I am thinking about doing a 3" body lift at the same time, would that be a problem.
I also found some doelsch spindles for 100 cheaper.
http://www.doetsch-shocks.com/9.asp
What do ya'll think? Any help, comments, complaits, criticism, would be appreciated?
http://performancelifts.com/cgi-bin/...TS98200-7.html
What should i do with the back? Blocks or Add-a-Leaf? The website shows options for an alignment kit and shocks, do i need those? I am thinking about doing a 3" body lift at the same time, would that be a problem.
I also found some doelsch spindles for 100 cheaper.
http://www.doetsch-shocks.com/9.asp
What do ya'll think? Any help, comments, complaits, criticism, would be appreciated?
#2
429 is too much, keep your eye out and you can find some good prices through this place.
AAL is gonna be stiffer in the back but give you less axel wrap than blocks will.
there is no problem with doing a body lift at the same time, as long as you've got new wheels/tires to go along with it stockers would just look tiny.
AAL is gonna be stiffer in the back but give you less axel wrap than blocks will.
there is no problem with doing a body lift at the same time, as long as you've got new wheels/tires to go along with it stockers would just look tiny.
#5
#8
#12
#13
Originally Posted by krumm
so, if someone could check this for me, i don't want to waist my money on something that isn't going to work.
3" Doetsch spindles
fabtech alignment kit
2" add-a-leaf kit
3" PA body lift
regear to 4.10
run 32-33's
(new shocks on next paycheck)
anything else i'm gona need?
3" Doetsch spindles
fabtech alignment kit
2" add-a-leaf kit
3" PA body lift
regear to 4.10
run 32-33's
(new shocks on next paycheck)
anything else i'm gona need?
if you dont mind me asking, did you add up how much all that is going to cost you?
#14
#15
Originally Posted by krumm
yeah, i just got five of my paychecks for the work i did in december and over christmas breaks, 50 hours a week (three different jobs) adds up to a preatty penny!
#17
Thread
Thread Starter
Forum
Replies
Last Post
eBay / Craigslist Find: Spindle lift & Body Lift - MA
annguyen1981
eBay & Craigslist Finds
0
10-07-2010 08:44 PM
ranger882
General Ford Ranger Discussion
11
12-03-2006 07:34 PM