Want to Buy: 15x10 wheels
#4
Yea I've been checking almost everyday. I'm really just looking for something cheap that will work since I'm about to throw all my money into a superlift and tires. If I end up buying wheels new Ill probably just go with some pro comps
#5
Never thought about SummitRacing.com....or Jegs.com...or TireRack.com...or 4wheelparts.com....or Quadratec.com(jeep site)....or eBay.com...or shoot, even your local wheel and tire shops?????
If you're wanting cheap, you'll be best to look into steel wheels. Roughly $50-75 each. As you mentioned, ProComp Series 52 is what I ran on mine when I was steel wheeled.....15x10 w/ 4" backspace. Not expensive either....rather cheap. And no stupid painted/sticker stripe on the lip.
Best bet is to look at wheel manufacturer websites and see what you like and check the specifications to see if they make the size and bolt pattern you're after. Simply making a post saying you're looking for 15x10's doesn't help at all.
If you're wanting cheap, you'll be best to look into steel wheels. Roughly $50-75 each. As you mentioned, ProComp Series 52 is what I ran on mine when I was steel wheeled.....15x10 w/ 4" backspace. Not expensive either....rather cheap. And no stupid painted/sticker stripe on the lip.
Best bet is to look at wheel manufacturer websites and see what you like and check the specifications to see if they make the size and bolt pattern you're after. Simply making a post saying you're looking for 15x10's doesn't help at all.
#6
Yea I've looked. I really just wanted to know if anyone was selling anything because I was talking to a guy on fordrangerforum that was selling a set of pro comp simulocks for like 250 or something like that and they're $110 a piece. So I was just checking to see before I buy those pro comps for like $68 a piece
Thread
Thread Starter
Forum
Replies
Last Post
tom kalmanidis
Wheels & Tires Semi-Tech
3
09-30-2009 03:21 PM
jaycheetwood
OLD - Suspension, Tires, & Wheels
9
03-29-2009 07:34 PM
UmphreysMcBill03
Wheels & Tires Semi-Tech
11
08-07-2006 11:19 PM