One of the best tire size caluclators
#1
One of the best tire size caluclators
I've used several online tire size calculators,but none of them went into imperial units for larger tire sizes like 33x12.5x15.
I came across this one lastnight and thought it was absolutely fantastic and one of the best I have used.
Check it out, it'l probably come in handy for many of you.
http://www.1010tires.com/TireSizeCal...?action=submit
I came across this one lastnight and thought it was absolutely fantastic and one of the best I have used.
Check it out, it'l probably come in handy for many of you.
http://www.1010tires.com/TireSizeCal...?action=submit
#6
That's the one I always used to use,but that doesn't have the imperial tire sizes.
Kind of hard if you want to compare a 245/75/16 to a 33x11.5x15 unless you know the metric measurements.
#7
Or use your brain... that's what the problem is with young ppl these days...
235 / 75 r 15
((235*((75/100)*2)/25.4)+15
Section width * Aspect Ratio as Percentage * 2 (because there's 2 sidewalls in a tire diameter) / 25.4 (to convert to inches) + wheel diameter
It's all very simple and Works every time! Put it in Excel and save it!
235 / 75 r 15
((235*((75/100)*2)/25.4)+15
Section width * Aspect Ratio as Percentage * 2 (because there's 2 sidewalls in a tire diameter) / 25.4 (to convert to inches) + wheel diameter
It's all very simple and Works every time! Put it in Excel and save it!
#8
Member
iTrader: (1)
Join Date: Feb 2005
Location: SoCal
Posts: 4,428
Likes: 0
Received 0 Likes
on
0 Posts
Or use your brain... that's what the problem is with young ppl these days...
235 / 75 r 15
((235*((75/100)*2)/25.4)+15
Section width * Aspect Ratio as Percentage * 2 (because there's 2 sidewalls in a tire diameter) / 25.4 (to convert to inches) + wheel diameter
It's all very simple and Works every time! Put it in Excel and save it!
235 / 75 r 15
((235*((75/100)*2)/25.4)+15
Section width * Aspect Ratio as Percentage * 2 (because there's 2 sidewalls in a tire diameter) / 25.4 (to convert to inches) + wheel diameter
It's all very simple and Works every time! Put it in Excel and save it!
Thread
Thread Starter
Forum
Replies
Last Post