Taking a body lift off
#1
#2
#3
Originally Posted by got-dirty
if youve still got all your factory stuff, all you need to worry about is those two threaded washers. you can either try to find another pair, or bolts just long enough to run through and put a nut on them.
I would prally buy new ones just to be safe.
#9
Ya you could prally just slide the gas lines back together. I wil be taking my whole bed off so i am just going to put new line on.
For taking the blocks out I would prally put a jack under it to take the weight when you smack the blocks out so that it dosent crash down.
the thing that holds the rad hose from hitting the fan. Bumper brackets.
For taking the blocks out I would prally put a jack under it to take the weight when you smack the blocks out so that it dosent crash down.
the thing that holds the rad hose from hitting the fan. Bumper brackets.
#11
Originally Posted by 99ranger4x4
i was just kidding about smacking out the blocks lol, i was going to jack up the body first..
OK lol never know these days. hell you could just loosen all 6 blocks and take a rope hook it to a truck and yank them all out at once. Kinda like when the people do that with table clothes and the plates don't move
#12
#14
#15
#16
Originally Posted by zabeard
Like i said i dont think you will need to do anything with the gas lines or the front washers.
why replace the gas lines for 100 bucks when you might get a fuel cell later.
why replace the gas lines for 100 bucks when you might get a fuel cell later.
$100 for a piece of rubber?? I figured it was prally $10. Well if I get back glass I may have to extend them anyways. Not sure if it bulges in that area.
#18
Originally Posted by red_fx2
just reading though the thread... josh can u explain a little better what "LT build" means? just curious
LT = Long travel. I am thinking of going with a long travel front end and rear set up. Like a prerunner. I have a thread with my plans. And with that kinda set up I do not think a BL would be a good idea to keep on. PLus I do not think it would look right.
heres my thread.....https://www.ranger-forums.com/forum2...ad.php?t=42775
Thread
Thread Starter
Forum
Replies
Last Post
Sonic04Edge
General Ford Ranger Discussion
11
06-04-2005 08:06 PM