which kit did you order? If you got the summit kit, just print out the performance accessories instructions.

link to them

http://performanceaccessories.com/in...ions/70033.pdf


Picture you requested. Its almost 1am so i'm not going to take a picture of mine plus i just drove my truck home and its hot lol just pull that clip off and you're fine.

 

One more issue lol..when i watch my bed in the mirror i can see it wiggle back and fourth when i hit bumps and i torqued all those bolts down to 92ft lbs..any ideas?

 

Did you add the little support blocks?

 

Yup there in there! I can hear the back rack bolt in the back hitting the cab it's driving me nuts!

 

crank them till the washers start to bend a little lol

 

Did that too lol

 

I added about 6 washers to gain more thread, it'll get tight and then spin loose..im thinking the threads in the mount location are f**ked up

 

If you added more washers I am willing to bet the bolt isn't getting tight enough. Take some out.

 

Did that too and the bolt does the same thing..I was thinking of just going out and finding a bolt at home depot with more threads on it?

 

Anyone?!

 

Well I fixed that ckunk noise in the cab..turns out the threads in the mount were stripped

 

Ok so I'm having problems with the core support bolt. I can't get the bolt to come loose. I have the nut off the top but the threaded washer is spinning with the bolt. I've tried channel locks heat and the impact. Any ideas

 

What size tires do you have and is it only a 3in body lift

 

who are you talking to?

Most people run 33" tires with a 3" body lift. Most if not all the information in this thread pertains to a 3" body lift.

 

The links are dead.... and read all replies.
Anything needed for steering shaft extension/angles? 00` 2wd 2.5L.