Ordered my body lift tonight!!!!
#1
Ordered my body lift tonight!!!!
Hey guys so i ordered my body lift tonight after i had a revelation. lol
So i went to go see the movie kick-*** with my Fiance and when i came back outside there was a lifted ranger next to me. I know it was a superlift lift on the truck cause it said superlift on the skid plate but it did have rancho shocks. Anyways with the way my truck was sitting next to it and how small it looked i went home and ordered the PA 3" BL from autoanything.
cant wiat to get it installed!!! only thing is my boy doesnt know that he is gonna help me install it yet! lol any advice on things i should have done first??? he will be working on it for about 8 hours before i get home to help him.
p.s anyone wanna come over and help for liqueor and pizza??
So i went to go see the movie kick-*** with my Fiance and when i came back outside there was a lifted ranger next to me. I know it was a superlift lift on the truck cause it said superlift on the skid plate but it did have rancho shocks. Anyways with the way my truck was sitting next to it and how small it looked i went home and ordered the PA 3" BL from autoanything.
cant wiat to get it installed!!! only thing is my boy doesnt know that he is gonna help me install it yet! lol any advice on things i should have done first??? he will be working on it for about 8 hours before i get home to help him.
p.s anyone wanna come over and help for liqueor and pizza??
#2
spray all of the bed and cab mount bolts with PB Blaster so it works while you wait for the kit to come in. I would spray them once per day until its time to install the kit. Also, be ready to have a Mapp gas torch, you can purchase one at home depot or your local hardware store its just like the propane torches but the bottle is yellow instead of black. The torch will help get the bolts out easier....just turn them bright red from the bottom with the torch and blast them off with the impact gun...that will melt all of the locktite off of the threads.
other than that you should be good to go
other than that you should be good to go
#4
#5
well today as i was sleeping i heard this BANG BANG BANG! on my front door, as i got up and went to the door the guy just left the package at the door. I live in a apt so anyone could of just grabbed it....
anyways its here!!!!!
cant wait to install it!!!!
Read the directions and the lift is gonna be a PITA. Took my boy out to famous daves and handed him the instructions book. He looked at me like WTF is this for? When i told him what he was gonna do hes like Bull SHET! but he will be home at 8:00 to start the lift. lol
hope everything works out well, if it does i will be taking him to see Atreyu tonight!
anyways its here!!!!!
cant wait to install it!!!!
Read the directions and the lift is gonna be a PITA. Took my boy out to famous daves and handed him the instructions book. He looked at me like WTF is this for? When i told him what he was gonna do hes like Bull SHET! but he will be home at 8:00 to start the lift. lol
hope everything works out well, if it does i will be taking him to see Atreyu tonight!
#7
spray all of the bed and cab mount bolts with PB Blaster so it works while you wait for the kit to come in. I would spray them once per day until its time to install the kit. Also, be ready to have a Mapp gas torch, you can purchase one at home depot or your local hardware store its just like the propane torches but the bottle is yellow instead of black. The torch will help get the bolts out easier....just turn them bright red from the bottom with the torch and blast them off with the impact gun...that will melt all of the locktite off of the threads.
other than that you should be good to go
other than that you should be good to go
What about the rubber bushings around the cab mount bolts? How do you keep them from burning if you heat the bolts with a torch?
#8
you dont need to worry about them since they are being replaced. if you really want to try and save them i would try not to use heat unless as a last resort
#10
hey guy i need help like bad!!!!!!!!!! my BL is not going good at all!!!!!! here it is day 2 and i am still stuck with the cab lift part.
SO when i try to lift up the body i jack aand i jack and i jack and finally i have enough room however now im running into the fact that i cant get the bushing and the bolt with the body lift spacer lined up! my back on my drivers side went perfect but i cant get the one in the driver side right. IVe been fighting with it for about 3 hours now.
BTW this is the BF....
SO when i try to lift up the body i jack aand i jack and i jack and finally i have enough room however now im running into the fact that i cant get the bushing and the bolt with the body lift spacer lined up! my back on my drivers side went perfect but i cant get the one in the driver side right. IVe been fighting with it for about 3 hours now.
BTW this is the BF....
#12
The way it sounds he did but im not sure..
So you cant get the bolt lined up to go through the hole? Maybe somthing is off since your doing it one side at a time and when u did the driver side something ended up miss aligned? Ive always done it one side at a time and not had problems but its just an idea as im not there to see exactly whats going on..
So you cant get the bolt lined up to go through the hole? Maybe somthing is off since your doing it one side at a time and when u did the driver side something ended up miss aligned? Ive always done it one side at a time and not had problems but its just an idea as im not there to see exactly whats going on..
#14
#15
ok well my bodylift is like 98% complete. however im having alot of movement of my cab and popping noises when i turn. also i did something stupid when lifting the cab. the metal funnel looking things that screw into the bolt, well i accidently drilled those out thinking they needed to be. so i ran a washer and nut on the bottom of the bolts to try to help. do i need to order those metal funnel looking things??
#16
Thread
Thread Starter
Forum
Replies
Last Post
slodsm
Wheels & Tires Semi-Tech
11
10-14-2006 02:12 PM