Just had my clutch replaced yesterday. All parts were replaced including the slave cylinder to the tune of $777. Seemed awful high to me. Just looking for second opinion. Clutch pack was around 300 and the slave cylinder was just over 100 so the rest was labor. Any thoughts?

 

Give us a little more about the truck, what motor, year, etc.

With labor for most clutches, shops around me are doing right around $400.

 

2000 3.0 litre 2wd.

 

here at ford its roughly 5.6Hr job at $120hrly. Adds up quick plus parts.

 

When I replaced the clutch in my 99 about 18 months ago, I got a complete clutch kit including pilot bearing, slave cylinder, pressure plate, etc for $275 to my door from clutchcityonline. Replaced everything myself.