2.9L & 3.0L V6 Tech General discussion of 2.9L and 3.0L V6 Ford Ranger engines.

dirty injectors (NEED HELP)

Thread Tools
 
Search this Thread
 
Old Feb 4, 2008
  #1  
03 EDGE's Avatar
Thread Starter
|
Member
Joined: Feb 2008
Posts: 4
Likes: 0
From: tampa fl
dirty injectors (NEED HELP)

i still have a miss in cylinder 4 and 6 and still idles rough and i belive it could be the injectors clogged has anyone had a problem with there injectors clogged abd if so what where the symptoms and how did you fix the problem...i have heard alot of this sea foam stuff and what is the best way to use it to clean the injectors and how affective is it?

p.s ive already checked the and changed the plugs and wires, checked the coil pack and changed the fuel filter and was a bit dirty in there that is why i belive it could be the injectors...any help is great thanx
 
Reply
Old Feb 4, 2008
  #2  
INT3RC3PTOR's Avatar
RF Veteran
iTrader: (4)
Joined: Jul 2005
Posts: 8,201
Likes: 2
From: Minnesooooota
im actually having this same problem with my 5.0 lately. im working on it tomarrow to figure it out but i think its either the injectors or maybe a bad plugs. but it has 2 new coilpacks and wires are brand new. and the ruff idle/hesitation used to only happen every once in a while but its now happening alot. so im slighty lost but im hoping to figure it out at my buddys shop tomarrow
 
Reply
Old Feb 5, 2008
  #3  
Hot Wheels's Avatar
Member
Joined: Oct 2006
Posts: 211
Likes: 1
From: Maple Plain, MN
When I had my misfires, I took it to our mechanic who had a cleaner that the public can't buy. Worked great on my working injectors, but my misfires were due to the coil on the injector failing and an injecter sticking closed. I replaced both myself, not that hard of a fix with a Haynes or Chilton manual, just a lot of time.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mr3kGT
2.9L & 3.0L V6 Tech
0
Oct 24, 2013 09:40 PM
mossyoak03
Snapshots
22
Jul 21, 2009 01:39 AM
02oregonedge+
4.0L OHV & SOHC V6 Tech
0
Sep 16, 2008 06:53 PM
FiNkEy
2.9L & 3.0L V6 Tech
9
Mar 17, 2008 05:34 PM
Kosmo04
Forced Induction & N20 Tech
11
Dec 8, 2005 02:29 PM




All times are GMT -6. The time now is 01:46 PM.