Ranger-Forums - The Ultimate Ford Ranger Resource

Ranger-Forums - The Ultimate Ford Ranger Resource (https://www.ranger-forums.com/)
-   2.9L & 3.0L V6 Tech (https://www.ranger-forums.com/2-9l-3-0l-v6-tech-32/)
-   -   no power steering - '99 3.0 (https://www.ranger-forums.com/2-9l-3-0l-v6-tech-32/no-power-steering-99-3-0-a-98120/)

DSMissed 11-30-2009 07:27 PM

no power steering - '99 3.0
 
Kinda sucks driving around town without power steering after a while. I bought the truck this way, so I don't know the history.

Ok, so the PS pump is hooked up, the pulley spins freely with the belt while the engine is running, and the reservoir is full of what looks like very clean fluid. Doesn't make any noise at all, but I have no power steering.

All my experience with PS pumps, when they go out or even start to go out they are noisy, and quite often it will seize up.

Is it possible for my pump to be bad, yet it still act fine?

84FordMan 12-01-2009 03:56 AM

I don't have a picture of the 99 P/S pressure line assembly, but Ford liked to use mufflers on their pressure lines around that time frame. They look like a little canister in the middle of the line, usually about 2" long and about 1 1/2" to 2" in diameter. They cannot be flushed out and they sometimes get clogged up.

DSMissed 12-01-2009 07:24 PM

Hmm, really. Ok, well I will look into that, hopefully that will fix it. Sounds cheaper than buying a whole new power steering pump.

99offroadrngr 12-01-2009 10:28 PM

yeah also look for leaks once u get it fixed....check for leaks going down the drivers side LCA....i had that and my steering rack was pissing out fluid lol but i still had power steering just leaked.

DSMissed 12-02-2009 07:32 AM

No it isn't leaking at all.

dcrymes99ranger 12-02-2009 10:09 AM

This is some great information to know incase mine goes out i have the exact same year and motor

DSMissed 12-02-2009 05:05 PM

It's too cold to mess with it today.. but when it warms up I will replace that muffler thing and update what happens.

84FordMan 12-02-2009 07:58 PM


Originally Posted by DSMissed (Post 1540578)
It's too cold to mess with it today.. but when it warms up I will replace that muffler thing and update what happens.

It is made into the line.

DSMissed 12-02-2009 08:14 PM

Oh, great! I thought it was going to be something simple, lol.


All times are GMT -6. The time now is 12:33 PM.


© 2024 MH Sub I, LLC dba Internet Brands