2019 XLT TMPS Fault error
 

Hello,
I have a 2019 Ranger XLT with 2.3
My wheels are about 3 yrs old and at the proper pressure. Yesterday I received a TPMS Fault message. In the display I can see has lost contact with the rear right. I am thinking it might be related to Ice/Snow and extreme cold. My thought was to reset the system and see if it comes back on again before taking things apart.

I see so many conflicting instructions on line and none seem to fit my vehicle. I dont have a physical button (that I can find). In my screen menu there is no reset option. I tried some instructions involving turning the hazards on/off 3 times. This works but takes me into learn mode. I dont think this is the same as a reset and I dont have a learn tool. When I exit out I get 2 honks (which I think is bad). The fault light remains on.

I read quite a few other postings regarding erroneous TPMS faults, but none have a solid conclusion. Most that replaced the sensors reported no change. I see a couple that indicate a phone charger was causing interference.

Looking for any advice. How do I reset this thing, or am I going down the wrong path.
Cam

going to repost in the general forum.. no traffic here.

Seeing that we are based in North America, everyone that might be able to help you was probably sleeping,

Most members have other lives and don't live on the forum.

Seeing that this thread has had 40+ views, I'm guessing none of those members new the answer.