Clunking in the front end
Thread Starter
|
Member
Joined: Dec 2015
Posts: 18
Likes: 0
From: Saratoga, NY
Clunking in the front end
So I bought my 4x4 the other day. Tried the 4 wheel drive by locking hubs and turning switch to 4Hi. Worked fine but passenger side wouldn't unlock afterwards. Took hub off looks fine. Then I bamged rotors off and put new rotors and brakes on. Now I have clunking noises in front end. Why why whyyy!! Is it the bearings that seemed fine or drive axles that should be unlocked. Do I have to put a camera under the truck or what??
So I bought my 4x4 the other day. Tried the 4 wheel drive by locking hubs and turning switch to 4Hi. Worked fine but passenger side wouldn't unlock afterwards. Took hub off looks fine. Then I bamged rotors off and put new rotors and brakes on. Now I have clunking noises in front end. Why why whyyy!! Is it the bearings that seemed fine or drive axles that should be unlocked. Do I have to put a camera under the truck or what??
Alright thats what i was going for to see if you had the manual hub conversion or still had the vacuum actuated system.
Thread
Thread Starter
Forum
Replies
Last Post
01_Camaro_SS
Exterior Semi-Tech
7
Dec 20, 2016 05:00 PM
