4.0 Intake manifolds
#1
4.0 Intake manifolds
Ok i was at ford today and i was told that if i bolted on a 4.0 mustang intake manifold it might boost HP by a bit..anyone know if it would..they werent a 100% sure but you never know hence im asking!...i kinda think it wont cause its listed at 207HP on the sticker and thats what our trucks have already stock with a diff intake? comments and thoughts would be awsome!
#8
#10
#11
It really depends on the length and size of the mustang intake runners compared to the runners on the truck. My guess would be that the runners on the ranger are considerably longer than the mustang. If the runners are shorter than the trucks then they would improve the top end at the cost of low end.
Also, are the cams the same on the mustang and a ranger? If the cams are different, an intake with shorter runners on the ranger will not do you that much good without cams designed to take advantage of the shorter runners.
Also, are the cams the same on the mustang and a ranger? If the cams are different, an intake with shorter runners on the ranger will not do you that much good without cams designed to take advantage of the shorter runners.
Thread
Thread Starter
Forum
Replies
Last Post
Hillyard
OLD - Engine & Drivetrain
0
03-27-2015 10:11 PM
Hillyard
OLD - Engine & Drivetrain
0
01-06-2015 07:02 PM
Checking Interest: Explorer Intake Manifolds DE
Smashed96gt
OLD - Engine & Drivetrain
0
01-14-2012 12:17 PM
01_ranger_4x4
OLD - Engine & Drivetrain
8
09-14-2010 05:34 PM