What year did Ford Fix the Timning Chain Rattle?
What year did Ford Fix the Timning Chain Rattle?
I need to put a junkyard motor in my 01 Ranger. I want to know what years to look for |
2003
but they did fix some earlier trucks under a recall |
so there was a recall for this???
cause i took my 02 and they didnt say anything about that |
GOOD GAWD-----IT'S A EPIDEMIC!!! Just had to replace mine for that same problem. Tensioner seized up and the chain was rattling and grinding against it. Had my mechanic just put in an '03 engine and he told me it runs like a top! Watch the VIN letter to make sure it matches.
|
um, ford actually DID NOT fix this issue, since mine is an 04, and mine rattles.
|
mine doesnt...its an 03
|
neither of my 03's did. one had 28k and the other had 54k
|
Originally Posted by FMD
um, ford actually DID NOT fix this issue, since mine is an 04, and mine rattles.
you dont know what you are hearing. who really cares if it makes noise. have you ever had anyone say it broke? maybe 2 or 3 people... |
around 03. my 03 was built in nov 02 now with 45k miles and no rattle yet. I've driven a used 02 with ~25k miles It had the timing chain rattle. I have yet to hear of any that have actually broke and destroyed the engine.
|
Heres my personal motto if isnt broke dont fix it.. my timing chain rattles but i could care less it isnt hurting the engine so why fawk with it?
|
Originally Posted by FMD
um, ford actually DID NOT fix this issue, since mine is an 04, and mine rattles.
I have 82,000 miles on my 03 and for the last 5k or so I have noticed it, ****ers. |
This problem does not happen to all 4.0 SOHC engines. It was more of a problem in 01 but it also happened to some 02 engines. Mine has over 70,000 miles on it and I have never gotten a single rattle out of the timing chain. It seems if an engine has the problem, it is difficult to fix. If it does not have the problem at low mileage it is usually good to go for many miles.
|
mine has had the rattle since about 10,000 miles or so. whined to the dealer, they said it was normal. come to find out, to change that chain is a HUGE job, u gotta pull the engine.
|
Is this only a problem in SOHC and not OHV. I ask because i have a sort of rattle on startup but I have a OHV.
|
Here's the condition I had on my pre-owned '01 Ranger. The extended warranty folks paid for the repair, minus my deductible. Hope it helps.
Engine - Timing Chain Rattle Noise TSB 04-15-4 08/09/04 RATTLE NOISE FROM PRIMARY CHAIN DRIVE AREA 2000-3000 RPM - 4.0L SOHC ENGINE FORD: 1999-2002 Explorer 2001-2002 Explorer Sport Trac, Explorer Sport, Ranger MERCURY: 1999-2002 Mountaineer This article supersedes TSB 02-08-01 to update part numbers and add a labor operation for vehicles with auxiliary air conditioning. ISSUE Some vehicles equipped with the 4.0 SOHC (single over-head cam) engine may exhibit a primary timing chain rattle noise. The noise is heard during hot and cold engine operation (but mainly heard on cold engines) under acceleration, typically at 2400-2500 RPM. To verify concern, accelerate in 2nd gear between 2000 and 3000 RPM and listen for rattle noise that sounds similar to spark knock. This may be caused by the primary timing chain tensioner system. ACTION Replace the Primary Timing Chain Tensioner, Chain Guide, Jackshaft and Crankshaft Sprockets with a Primary Timing Chain Tensioner Kit. The Kit includes an improved Primary Chain Tensioner, as well as updated Primary Chain Guide, Primary Jackshaft, and Crankshaft Sprockets. Required fasteners, Primary Timing Chain, and Front Cover Gaskets are also included. Refer to the following Service Procedure for details. SERVICE PROCEDURE Verify the condition. Obtain the correct Primary Timing Chain Tensioner Kit and follow the instruction sheet supplied with the Kit. Use Kit 2U3Z-6D256-CA (balance shaft engines) for: ^ 1999-2001 4X4 Explorer/Mountaineer ^ 2001-2002 4X4 Sport/Sport Trac ^ ALL 2002 Explorer/Mountaineer, except engine codes 2G-960-AA and 2G-964-AA. Use Kit P/N 2U3Z-6D256-DA (non balance shaft engines) for: ^ 1999-2001 4X2 Explorer/Mountaineer ^ 2001-2002 4X2 Sport/Sport Trac ^ 2002 MY Explorer/Mountaineer with engine codes 2G-960-AA and 2G-964-AA ^ ALL 2001-2002 Ranger Labor Operation Claiming Chart Parts Block OTHER APPLICABLE ARTICLES: NONE WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage DEALER CODING CONDITION BASIC PART NO. CODE 6D256 42 |
All times are GMT -6. The time now is 01:37 PM. |
© 2024 MH Sub I, LLC dba Internet Brands