Does anybody here have the radio wiring diagram for the 2007 Ranger? Is it the same as 2006 because I know there was a lot of wiring changes with the 07.

Thanks

 

*see Below*

 

well this one doesn't have the radio wiring colors on it?

 

this is from my 07 Wiring manual
*Make this a sticky*

BK=black
BN=Brown
BU=Blue
DB=Dark Blue
GN=Green
GY=grey
LB=Light Blue
LG=Light Green
NA=Natural
OG=Orange
PK=pink
RD=Red
SR=silver
TN=Tan
VT=Violet
WH=White
YE=yellow

BU-WH Dimmer-IP/SWITCH Illumination
BK-YE Ground-Seat Bracket Rear Left
GN-OG Fuse
BN-WH Right Rear Speaker(+)
BN-BU Right Rear Speaker (-)
WH-VT Right Front Speaker(-)
WH-OG Right Front Speaker(+)
VT-RD FUSE
WH-BU FUSE
BK-BU Ground / Generic Logical type 3 audio entertain.
WH-GN Left Rear Speaker(+)
BN-YE Left Rear speaker (-)
WH Left Front speaker(+)
WH-BN Left Front Speaker (-)
BK-BU Ground / Generic Logical Type 3 Audio entertain.

 

so the blue/white is the dimmer switch, but which one is the 12v ignition?

 

Fuse 6 - Hot in Run or Acc: white/blue
Fuse 22 - Hot in Start: green/orange
Fuse 24 - Hot at all times: violet/red

 

thanks guys, I appreciate that.

 

bump, anyone got one installed? I think I might have a theory on why my kenwood unit was so underpowered when I installed it.... these kits for the 04+ units are missing ~2-3 prongs and one of those is power, do you think that would make an aftermarket radio sound less powerful?

 

buy the proper plug go to the local audio shop tell them what your doing and they will get u set up. you dont need to ever hook the dimmer wire up because they never work. but the dash harness connect the same color wires together with crimp caps, or solder and plug it in and plug it and and there you go.

 

 

If you need another wiring diagram of a different state let me know..i have everything and anything at my disposal!

 

wth...did my pictures go missing.....ill repost them!

 

Cause I have the acc wire connected and the 12v battery connected and it’s still not working