how to take out head unit
i am replacing my stock head unit with a new one how do i take the stok one out?
|
ford radio removal tool...
|
grr is there ne other way
|
finishing nails jammed into the 4 pin holes.. then press all four outwards, and pull.. its harder, but works all the same..
|
by press out what do u mean?
does the whole unit come out as one also? |
Originally Posted by 93rangerxlt4.02007
grr is there ne other way
|
If you want to, this way is a little more involved but you dont need to have any special tools or anything.
Take out the bezel by removing the 2 7mm bolts underneath the radio, and then pull the bezel from the dash. It's held in with pressure clips. Remove the clips that run to all your accessories (cig lighter, 4x4 switch, fog lights, etc.) so you can work with it a little easier. you'll see there are some metal clips on the side of the ford cd player that hold it in. Press them in and you can get the cd player out. takes some finagling, but it is easier than trying to get it out without removing the bezel |
aight ill see how it goes
|
by outwards, i mean push each tool, or nail away from the sides.. both left side holes, push towards the steering wheel, both right side holes, push near the passengerside door
|
I agree with kyle. That's how i did it and it didn't take too much work.
|
All times are GMT -6. The time now is 05:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands