hell yea and it eats all the main stream stuff around me hahahahaah and i payed less then half
|
didnt u have a ap1500? have u gotten metered with the 2k yet?
|
Originally Posted by Trailhead_273
(Post 1785460)
hell yea and it eats all the main stream stuff around me hahahahaah and i payed less then half
|
Here is an example. ****ty alpine mrp-1000 for $300 that does 600w rms a 4 ohm or a audioque that does 510w @ 4 ohm. for $250 how are these amps your talking about that much better??
Don't buy **** just because its not mainstream thats retarded. http://www.churchsoundcheck.com/Reso...IMAGE1%202.GIF |
What exactly is this graph showing? Haha is this supposed to mean something? I don't buy sh!t because it's not mainstream. I buy it because it's quality and puts down power for much much cheaper than mainstream.
|
Its a chart showing the impedence rise in relation to the frequency of music.
Impedence is a measure of DC current resistence of the voice coil. Music is AC, your precious 1 ohm sub is actually 3-4 ohm when it plays music. notice how its only at 3ohm at 20hz then rises significantly to almost 18ohms. most spl guys run a ported box tuned no lower then 30Hz so in all actuality your sub runs at 5 Ohm and only goes up from there. HAHAHA back at you. jokes on you if you think your getting 2000w from your amp I am in no way stickin up for mainsteam audio, just disproving that your ultra low ohm capable amps are actually very weak in comparison to a amp rated higher at 4ohm |
Haha And what makes you think I'm not getting that?
|
What exactly is this graph showing? Haha is this supposed to mean something? I don't buy sh!t because it's not mainstream. I buy it because it's quality and puts down power for much much cheaper than mainstream. |
LOL Do you remember how much of a fool you looked like in your "Truth about Ohms" thread? It's happening again. You should just stop now. You're not making any valid points here.
|
Yep, which is why im trying for a more civilized conversation, no matter how much someone laughs in my face and pisses me off. even though I feel do like ****ing slapping the **** out of half of you, im trying to be calm.
Yet this seems very familiar to that conversation, I do all of the intelligent talk and you guys laugh and bring nothing to the table. I will give up since im only wasting my time on people who could care less. |
You brought something to the table? A half-ass graph means nothing.
|
WOW! This thread went south really fast. I looks like everyone is right in one form or another. I see his point about the resistance increasing with the frequency (it is true). Perhaps a better way to show it would be a graph of a Sundown sub vs. a high quality "name brand" sub. I also understand how you spl guys are all about power @ 1ohm. I undersand how you this as relative no matter what amp you use and youre right if they were used on the same speakers/subs. Now lets get back to posting up some cool pics of our setups :)
|
On a final argumentative note, my point I'm trying to make is, I'd much rather spend less money on an amp that can push 1500w+ rms vs spending a lot more money for something mainstream that could do the same thing.
|
Can we get off the d*ck waving and back to the pics/discussions of installs?
|
Post some pics of some installs then.
|
Originally Posted by Chaosratt
(Post 1785684)
Can we get off the d*ck waving and back to the pics/discussions of installs?
GB :) |
3 Attachment(s)
been through a few things
originally had 1 10" p2 shoe horned behind the seat.. too big some powered flat thing.. sucked bazooka tubes ... enoughsaid sony xl slim 10".. fried 2 of them pioneer shallow 10" in a sealed box.. pretty decent Attachment 89685 decided I was gonna look into 8"s MA Audio 8" sealed box.. Sounded like poo Attachment 89686 Attachment 89687 RE Audio RE-X 8" in sealed box.. liked alot! bought another RE-X 8" built a custom box to fit int he back of the cab .. i will have to get pics. This has been done for a while and ive yet to want to change the set up ... so I am gonna say im happy with it! pics of this to come. |
If you like 8's, get a couple Sundown sa-8's and push 2 of them at about 1k watts. You'll be very happy.
|
Originally Posted by rangerboy101
(Post 1808348)
If you like 8's, get a couple Sundown sa-8's and push 2 of them at about 1k watts. You'll be very happy.
|
+1 on the sundowns.
The RE 8's are pretty clean soundign too. I can't resist this though. https://www.ranger-forums.com/pictur...pictureid=9654 These guys aren't loud enough for me though, clean as hell though. I still gotta clean up the wires. If you want big sound get an extended cab. Plenty of room to work with, well kinda. It's incredible how many setups you go through trying to get it just right. Between all my vehicals I've had countless sub and amp combos, and lets not even get into components, I used to go through componant setups like crazy. |
4 Attachment(s)
Nothing fancy but here is my system.I replaced all the factory speakers with Pioneer 4-way's.
Installed a Sony head unit. Attachment 89644 Built a couple custom sealed boxes and threw in some cheap 8's that sound great by the way.I still need to carpet the boxes. Attachment 89645 Attachment 89646 Mounted a 200 watt RMS Pyle amp under the drivers seat. Attachment 89647 You won't here me booming 2 blocks away but the sound inside the cab is very clear with good bass.I lost no drivers space with this install. |
2 Attachment(s)
here we go, here are some pics of the updated stuff finally!
Attachment 88438 kenwood kvt-512 Attachment 88439 2 RE Audio RE-X8's in a custom box.. ended up having to pull the console and braces just to get the box in the truck. |
2 Attachment(s)
Well I have to say, I'm quite happy with my audioque amp. single fi 12. not a reg cab, but...
Attachment 88436 Attachment 88437 |
Used to have 2 Pyle 12" Blue Labels but was too loud and the seat had to be up a few inches. I was real real loud though. the link shows
http://www.facebook.com/photo.php?pi...&id=1650173046 I have 2 Kicker CompVT 8" now and its much more enjoyable but still rattles. lol |
Originally Posted by <TX>TORKiT
(Post 1728571)
Kicker 10" L7 in kicker box installed today 9/8/2010. The amp I chose to run is a 200W Alpine V12 bridged. The single cab is bumpin hard enough.
http://i75.photobucket.com/albums/i2...t/KickerL7.jpg |
All times are GMT -6. The time now is 12:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands